Manhart 数控下折弯机常见故障原因及解决方法有哪些？

**Common fault causes and solutions for CNC downward bending machines**
1、 The working principle and main components of a CNC downward bending machine
The CNC downward bending machine is an important equipment for metal sheet metal processing. It controls the downward pressure head through the CNC system, and performs high-precision bending of the sheet metal according to the preset bending angle and process parameters. Its main components include CNC system, hydraulic system, mechanical transmission system, mold, etc.
2、 Common Fault Phenomena and Cause Analysis of CNC Downward Bending Machine
1. Fault phenomenon: Inaccurate bending angle
Cause analysis: Possible reasons include mold wear, insufficient hydraulic system pressure, and incorrect parameter settings in the CNC system.
2. Fault phenomenon: The equipment runs unevenly and produces abnormal noises
Cause analysis: It may be caused by loose mechanical components, damaged bearings, poor lubrication, or air mixing in the hydraulic system.
3. Fault phenomenon: Hydraulic system malfunction, such as unstable pressure, leakage, etc
Cause analysis: It may be caused by damage to the oil pump, aging of pipelines, failure of seals, or oil contamination.
4. Fault phenomenon: CNC system malfunction, such as program operation error, display screen malfunction, etc
Cause analysis: It may be caused by damage to internal components of the CNC system, program errors, improper operation, or external interference.
3、 Solutions and suggestions
1. Inaccurate bending angle
Solution: Check the wear of the mold and replace severely worn molds in a timely manner; Check if the hydraulic system pressure is normal, adjust or replace the oil pump; Check if the parameter settings of the CNC system are correct and calibrate according to the operation manual
2. The equipment operates unevenly and produces abnormal noises
Solution: Tighten the mechanical components to ensure no looseness; Check the damage of the bearings and replace them in a timely manner; Strengthen lubrication and maintenance to ensure good lubrication; Check if the hydraulic system is mixed with air and perform exhaust treatment.
3. Hydraulic system malfunction
Solution: Check the damage of the oil pump and replace it in a timely manner; Check the aging of the pipeline and replace the aging pipeline; Check if the seal is ineffective and replace the seal; Check for oil contamination and replace with clean oil.
4. CNC system malfunction
Solution: Check if the internal components of the CNC system are damaged and replace them in a timely manner; Check for program errors and make corrections according to the operating manual; Check if the operation is standardized to avoid misoperation; Check for external interference and take shielding measures.
4、 Fault prevention and maintenance measures
1. Regularly clean and maintain the equipment to ensure that the interior and exterior of the equipment are clean and free of debris.
2. Regularly check the fastening of mechanical components to ensure that there is no looseness.
3. Regularly inspect the wear of vulnerable parts such as bearings and seals, and replace them in a timely manner.
4. Regularly check the oil contamination of the hydraulic system and replace clean oil regularly.
5. Regularly maintain and upkeep the CNC system to ensure its normal operation.
5、 Conclusion
Correctly identifying and solving the problem of CNC bending machine faults plays an important role in improving production efficiency and ensuring production safety. Through the common causes and solutions of faults introduced in this article, users can promptly handle problems in daily use, avoiding the expansion of faults and causing greater losses. At the same time, strengthening equipment maintenance and fault prevention is also the key to ensuring the normal operation and long service life of the equipment. Therefore, it is recommended that users pay attention to the maintenance and upkeep of the equipment in their daily operations, promptly identify and solve problems, and ensure the smooth progress of the production process.