Manhart 折弯机在日常使用过程中该如何保养和清洁呢？

Maintaining and cleaning the bending machine during daily use is an important measure to ensure stable operation, extend its service life, and improve processing quality. The following are detailed maintenance and cleaning steps:
1、 Maintenance
1. Lubrication and maintenance:
-Regularly check the lubrication system of the bending machine to ensure sufficient and clean lubricating oil or grease.
-According to the equipment manual, regularly replace lubricating oil or grease to ensure smooth operation of the equipment.
-Clean and replace the oil filter to ensure the purity and fluidity of the lubricating oil, and avoid malfunctions caused by oil stains or solid particles entering the machine interior.
-For the addition of lubricating oil, it should be done according to the instructions in the operating manual to avoid excessive or insufficient amounts.
2. Maintenance of mechanical components:
-Regularly inspect various mechanical components such as spindles, gear transmission systems, and motors to ensure their proper functioning.
-When wear, looseness or other abnormal conditions are found, repair or replace parts in a timely manner.
-Regularly check the tightness of fasteners to prevent accidents caused by looseness.
3. Maintenance of electrical system:
-Regularly inspect electrical circuits, wiring terminals, and switches to ensure their connections are secure and undamaged.
-Regularly clean the dust on the surface of electrical equipment to maintain its heat dissipation effect and prevent equipment failure caused by overheating.
4. Tool maintenance:
-Check the wear of the cutting tools, and replace those with severe wear in a timely manner.
-Regularly clean and lubricate the cutting tools to reduce friction and wear during the machining process.
2、 Cleaning
1. Regular cleaning:
-After daily use, thoroughly clean the bending machine to remove metal debris and oil stains.
-Use a soft cloth or brush to remove metal shavings and dust, keeping the surface of the equipment clean.
-Clean the bending mold to ensure a smooth surface and avoid affecting the bending quality due to the accumulation of dust, stains, and other substances on the mold surface.
2. Clean the lubrication system:
-Turn off the main power of the CNC bending machine and unplug the power plug of the machine head.
-Prepare a certain concentration of cleaning agent and pour it into the lubrication system.
-Activate the manual movement function of the CNC bending machine to allow the cleaning agent to flow in the lubrication system until there is no longer any old lubricant in the lubrication system.
-Pour out the cleaning agent from the lubrication system and carefully rinse the interior of the lubrication system with clean water.
-Add new lubricant.
3. Clean the conveyor belt and work area:
-Clean the dust and debris on the conveyor belt with a brush, then rinse it with clean water and wait for it to air dry naturally.
-Clean the dust and debris on the workbench and surrounding ground with a cleaning cloth, then rinse thoroughly with water and wait for it to air dry naturally.
Through the above maintenance and cleaning measures, the stable operation and extended service life of the bending machine can be ensured, and the processing quality and efficiency can be improved. In addition, the company should regularly organize training on the operation of bending machines to familiarize operators with the various functions and operating procedures of the machines, and remind them to pay attention to safety precautions and correct usage methods.