Manhart How to adjust the pressure parameters of the twisting axis bending machine based on the thickness and hardness of the raw materials?

According to the thickness and hardness of the raw materials, adjust the pressure parameters of the twisting axis bending machine by following the steps below:
1、 Determine material thickness
1. * * Read material thickness * *: Firstly, determine the thickness of the material to be processed through processing orders or actual measurements.
2. * * Consider the influence of thickness on bending: * * The thickness of the material directly affects the pressure required for bending. Thicker materials typically require greater pressure to ensure sufficient bending.
2、 Evaluate material hardness
1. * * Hardness assessment * *: Understand the hardness characteristics of the material. The higher the hardness of the material, the greater the pressure required for bending.
2. The relationship between hardness and pressure: When adjusting pressure, the hardness of the material should be considered. For example, for metals with higher hardness, higher pressure values need to be set.
3、 Adjust pressure parameters
1. * * Initial Setting * *: Set an initial pressure parameter based on general experience or recommended values in the equipment manual.
2. * * Adjustment steps * *:
-* * Adjust blade depth * *: Ensure that the blade depth is slightly less than the material thickness, usually about 70% of the material thickness. This helps ensure the appropriate application of pressure.
-Adjust the pressure of the feeding roller according to the thickness and hardness of the material. Excessive pressure may cause material deformation, while insufficient pressure may affect the bending angle.
-Adjust the activity scale: Adjust the position of the activity scale based on the material properties and the required bending angle. Being too large or too small in position may affect the processing quality.
-* * Adjust spring position * *: Gradually adjust the spring position to find the most suitable position to ensure sufficient bending force and stable processing.
3. * * Trial processing and adjustment * *:
-Conduct trial processing and observe the bending effect.
-Based on the trial processing results, gradually adjust the pressure parameters until the desired bending effect is achieved.
4、 Induction and Summary
1. * * Comprehensive consideration * *: When adjusting pressure parameters, it is necessary to comprehensively consider the thickness, hardness, and characteristics of the material and equipment.
2. * * Experience accumulation * *: Through continuous practice and accumulation, a set of pressure adjustment methods can be formed for different materials and processing needs.
3. * * Precautions * *:
-During the adjustment process, attention should be paid to operational safety to avoid accidents.
-After the adjustment is completed, sufficient trial processing should be carried out to ensure that the processing quality meets the requirements.
-If necessary, you can refer to the equipment manual or consult professional advice.