Manhart hat are the safety operating procedures for twisted axis CNC bending machines?

#Safety Operation Regulations for Twisted Axis CNC Bending Machine
To ensure the safe operation of the twisted axis CNC bending machine, safeguard the personal safety of operators, and ensure the normal operation of equipment, this safety operating procedure is specially formulated. This regulation is applicable to operators of twist axis CNC bending machines and requires them to strictly comply with it.
##1、 Preparation before operation
### 1. Check the equipment
*Confirm that the equipment is in good condition and that there are no abnormalities in mechanical components, electrical components, hydraulic systems, etc.
*Check whether the lubrication points of the equipment are well lubricated, and whether the lubricating oil, hydraulic oil, etc. are sufficient.
*Check if the safety devices are intact, such as safety doors, emergency stop buttons, etc.
### 2. Read process documents
*Carefully read and understand the process documents, understand the processing requirements, material properties, and other information.
*Check whether the workpiece to be processed meets the process requirements, ensuring that the workpiece size, material, quantity, etc. are correct.
### 3. Adjust equipment
*Adjust the bending angle, bending speed and other parameters of the equipment according to the process requirements.
*Check if all components of the equipment are properly adjusted to ensure there are no looseness, displacement, or other issues.
##2、 Personal protection
*Operators must wear complete personal protective equipment, including safety helmets, protective goggles, protective gloves, etc.
*Operators should wear tight, non slip work clothes and avoid wearing loose clothing or jewelry that may cause accidents.
##3、 Operation process
### 1. Power on and start up
*Turn on the device power switch and start the device.
*Check if the device is running normally after startup, without any abnormal sounds or vibrations.
### 2. Place the workpiece
*Place the workpiece on the equipment according to the process requirements, ensuring that the workpiece is placed steadily and firmly.
*Avoid placing heavy or oversized workpieces on the equipment to prevent damage or safety accidents.
### 3. Start bending
*Press the start button to start the bending operation.
*During the bending process, pay attention to observing the operation status of the equipment and the bending condition of the workpiece to ensure that the bending quality meets the requirements.
### 4. Shutdown operation
*After completing the bending operation, press the stop button to stop the equipment.
*After shutdown, cut off the power supply of the equipment and ensure that it is completely turned off.
##4、 Emergency situation handling
### 1. Emergency stop
*When abnormal situations occur in the equipment or safety hazards are discovered, the emergency stop button should be immediately pressed to shut down the equipment immediately.
*After emergency shutdown, the equipment power should be quickly cut off to ensure complete shutdown.
### 2. accident report
*After a safety accident occurs, operators should immediately report to their superiors, explaining the accident process, causes, and losses.
*Cooperate with relevant departments to investigate and handle accidents, summarize experiences and lessons learned, and prevent similar accidents from happening again.
##5、 Daily maintenance
### 1. Cleaning and maintenance
*Regularly clean the dust, oil stains, and other dirt on the surface of the equipment to keep it clean.
*Check the lubrication condition of each component of the equipment, and add or replace lubricating oil, hydraulic oil, etc. in a timely manner.
### 2. Tightening components
*Check whether the fasteners of the equipment are loose or detached, such as screws, nuts, etc.
*Tighten loose fasteners to ensure the stability of the equipment structure.
### 3. Check electrical components
*Regularly check the wiring of electrical components to ensure that the wiring is secure and there is no exposed phenomenon.
*Check the working status of electrical components, such as contactors, relays, etc., to ensure they are functioning properly.
### 4. Lubrication and maintenance
*According to the lubrication requirements of the equipment, regularly lubricate and maintain each lubrication point of the equipment.
*Use appropriate lubricating oil, grease, etc. to ensure good lubrication of the equipment.
By following the above safety operating procedures, the safe operation of the twist axis CNC bending machine can be ensured, the probability of safety accidents can be reduced, and the personal safety of operators and the normal operation of equipment can be guaranteed.