曼哈特（广东）数控机床有限公司全电动伺服数控卷板机安全使用教程

**Safe Use Tutorial for Fully Electric Servo CNC Plate Rolling Machine**
**1、简介**
The fully electric servo CNC bending machine is an advanced equipment widely used for curling various metal sheets. In order to ensure the safety of operators and improve production efficiency, this tutorial will provide a detailed introduction to the safe use of the fully electric servo CNC rolling machine.
**2、 Equipment inspection**
1. Before starting the equipment, ensure that it is properly grounded to prevent electric shock.
2. Check if all fasteners are loose, especially the blades, rollers, and transmission components.
3. Check if the lubricating oil is sufficient and ensure that the lubrication system of the equipment is working properly.
4. Ensure that the power and control cables are not damaged and connected properly.
**3、 Preparation before operation**
1. Wear personal protective equipment, such as safety glasses, gloves, work clothes, etc.
2. Familiarize yourself with all buttons, switches, and indicator lights on the control panel to ensure understanding of their functions.
3. Choose suitable rolling molds and cutting tools according to work requirements.
**4、 Operation steps**
1. Turn on the power switch and start the device. Observe if there are any abnormal sounds or vibrations in the equipment.
2. Set the required curling parameters, such as curling radius, speed, etc., through the control panel.
3. Place the metal sheet to be curled on the curling machine, adjust the position, and ensure that the sheet is aligned with the mold.
4. Press the start button to start curling. During the curling process, closely observe the curling condition of the board, and stop it promptly if there are any abnormalities.
5. After the curling is completed, turn off the device and remove the curled board.
**5、 Precautions**
1. During operation, it is strictly prohibited to extend hands or any tools into the movement area of the equipment.
2. It is prohibited to adjust parameters or perform maintenance operations while the equipment is running.
3. In case of equipment malfunction or abnormal situation, the operation should be stopped immediately and professional assistance should be sought.
Before using the equipment, professional training should be received to ensure understanding of the operation and safety requirements of the equipment.
**6、 Maintenance and upkeep**
1. Regularly clean the equipment, remove dust and oil stains, and ensure the normal operation of the equipment.
2. Regularly inspect and replace lubricating oil to ensure that the lubrication system of the equipment is working properly.
3. Regularly inspect the fasteners of the equipment to ensure that there is no looseness.
If any damaged or worn parts of the equipment are found, they should be replaced in a timely manner.
**7、 Conclusion**
The fully electric servo CNC rolling machine is an efficient and precise equipment, but safety requirements must be strictly followed during operation. Through the study of this tutorial, it is hoped that operators can proficiently master the operation methods of the equipment, ensuring the safety and efficiency of the production process.