简体中文 
English 
العربية 
Français 
Русский 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog **Safety operation and maintenance rules for combined punching and shearing machines**
1、 * * Safety operation rules**
1. Wear protective equipment before operation: Before operating the joint punching and shearing machine, operators must wear complete personal protective equipment, including but not limited to safety shoes, protective glasses, gloves, and work clothes. These equipment can effectively reduce accidental injuries during operation.
2. * * Check machine stability * *: Before starting work, check if the machine is placed on a stable ground to ensure that it does not move or tilt due to vibration or external forces.
3. * * Ensure correct tool installation * *: Check if the tool is installed correctly, securely fastened, and free from looseness or damage. Incorrect tool installation may lead to serious operational accidents.
4. * * Prohibit operation of internal components * *: During the operation of the joint punching and shearing machine, any unauthorized operation or maintenance inside the machine is strictly prohibited.
5. * * Keep the work area clean * *: Keep the work area clean and avoid interference with operations such as oil and debris. A clean working environment helps reduce the risk of accidents.
6. * * Stay focused during operation * *: Stay fully focused and not distracted during operation. During the operation of the machine, behaviors such as talking and eating should be avoided.
7. * * Prohibit placing debris * *: Do not place any items unrelated to work on the machine or workbench. The presence of debris may lead to accidental injury.
8. * * Turn off power after use * *: After completing work and confirming that the machine has come to a complete stop, the power should be turned off to prevent accidental start-up.
2、 Maintenance rules**
9. * * Regular lubrication of machine components * *: According to the manufacturer’s recommendations, regularly use appropriate lubricants to lubricate key components of the machine. This helps to reduce wear and prolong the service life of the machine.
10. * * Check if the electrical circuit is normal * *: Regularly check whether the electrical circuit of the machine is intact and whether the joints are firm to ensure the normal operation of the machine and prevent electrical accidents.
In addition, for the maintenance and upkeep of the joint punching and shearing machine, it should also include regular inspections of the machine’s fasteners for looseness, checking the wear of the cutting tools, and promptly replacing severely worn components. At the same time, regular comprehensive inspections of the machine are carried out to ensure that it is in good working condition.
By following these safety operation and maintenance rules, the safe and stable operation of the combined punching and shearing machine can be ensured, the service life of the machine can be extended, and the risks during operation can be reduced.
