曼哈特（广东）数控机床有限公司折弯机维修

The maintenance of the bending machine mainly includes the following steps:
1. * * Regularly replace hydraulic oil * *: When replacing hydraulic oil, first clean the oil tank with cleaning solution, then add new hydraulic oil and tighten the oil tank cover.
2. * * Keep the body clean * *: When cleaning, use a dry, lint free soft cloth to wipe.
3. * * Check the screws in all parts * *: If any loose parts are found, they should be tightened in a timely manner.
In addition, there are some other maintenance matters that need to be noted:
** * Safe operation * *: During use, ensure the safety of operators, wear safety helmets and protective clothing, and avoid carrying metal objects into the machine to prevent electric shock accidents.
** * Operation preparation * *: Before using the bending machine, make detailed preparations, check whether all components of the machine are normal, whether the lubricating oil is sufficient, and whether the installation of the bending machine is correct, to ensure that the machine can operate normally.
** * Round bending machine use * *: During the use of the round bending machine, it is important to maintain stable operation, precise roundness, sharp cutting tools, slow and stable cutting speed, and avoid overloading to prevent accidents.
*Additional Reminder: The operation of the bending machine requires the operator to have a certain level of technical ability, master the correct operating methods, and not to change or adjust the machine parameters without authorization. Damaged tools are not allowed to be used to avoid accidents.
Following the above steps and precautions can ensure the good operation of the bending machine and extend its service life. If you are not a professional, please do not operate or maintain it without authorization to ensure safety.