简体中文 
English 
العربية 
Français 
Русский 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog When storing the ultrasonic welding machine for a long time, in order to ensure its normal operation and extend its service life when restarted, the following effective protective measures should be taken:
1. Cleaning and Drying: First, thoroughly clean all parts of the welding machine, including the welding head, bottom mold, and working area. Use a soft cloth to wipe and ensure that all welding slag, oil stains, and dust are removed. Afterwards, ensure that the equipment is completely dry and free from moisture or dampness.
2. Lubrication and Protection: Apply an appropriate amount of yellow grease or other recommended lubricants to all mechanical parts that require lubrication, such as lifting grooves, screws, etc. This can reduce friction, prevent rust, and ensure smooth operation of the mechanical parts when restarted.
3. Dust Prevention and Covering: Use a dust cover (such as a plastic bag) to cover the appearance of the equipment, ensuring that it is not affected by dust, dirt, or other impurities. Meanwhile, this can also prevent unnecessary physical damage to the equipment, such as impacts or scratches.
4. * * Storage Environment * *: Choose a dry, ventilated, and suitable temperature place to store the ultrasonic welding machine. Avoid exposing the device to extreme temperatures, humidity, or direct sunlight, as this may cause equipment damage or performance degradation.
5. Regular inspection: Even if the equipment is in a long-term storage state, it is recommended to check its condition regularly. This includes checking whether the cable joints are loose, whether the mechanical parts are still lubricated, and whether the dust cover is intact. If any problems are found, they should be dealt with promptly to ensure that the equipment can start and operate normally when needed.
6. * * Power Management * *: It is recommended to turn off the power of the equipment during non working hours to avoid prolonged electrical loads and potential electrical failures. Meanwhile, ensure that the power plug is stored in a dry and easily accessible place to prevent moisture or damage.
7. * * Document Record * *: Record the last time the equipment was used, maintenance details, and any issues that need attention. This will help to quickly review the status of the device when restarting and take corresponding measures.
By following the above protective measures, it can be ensured that the ultrasonic welding machine remains in good working condition after long-term storage and is ready for production use at any time.
