How does Manhart (Guangdong) CNC Machine Tool Co., Ltd. consider the material characteristics and cutting requirements when adjusting the parameters of the laser cutting machine?

When adjusting the parameters of the laser cutting machine to optimize cutting efficiency, it is crucial to consider the characteristics of the material and cutting requirements. Here are some suggestions to help you adjust parameters:
Firstly, based on the characteristics of materials, there are differences in their absorption rate, thermal conductivity, and melting point for lasers. For example, materials with high reflectivity may require higher laser power to ensure effective cutting, while materials with high thermal conductivity may require faster cutting speeds to prevent heat accumulation. Therefore, when adjusting parameters, it is necessary to fully understand these basic characteristics of the material and make corresponding adjustments based on its characteristics.
Secondly, consider cutting requirements, including cutting accuracy, cut quality, cutting speed, and production efficiency. For example, for applications that require high-precision cutting, it may be necessary to reduce the diameter of the laser beam and reduce the cutting speed; For applications that pursue high production efficiency, it may be necessary to increase laser power and improve cutting speed.
When adjusting parameters, a step-by-step approach can be adopted. Firstly, set an initial parameter combination and then conduct actual cutting tests. Based on the test results, observe whether the cutting quality, speed, and efficiency meet the requirements. If not satisfied, the parameters can be adjusted one by one, such as increasing or decreasing laser power, adjusting cutting speed, or changing gas pressure, etc., and then tested again until the best parameter combination is found.
In addition, you can also refer to the parameter suggestions provided by laser cutting machine manufacturers or consult professional technical personnel for advice. They usually provide parameter adjustment suggestions tailored to specific materials and cutting requirements based on their rich experience and professional knowledge.
Finally, it should be noted that different brands and models of laser cutting machines may have different parameter adjustment ranges and limitations. Therefore, when adjusting parameters, it is essential to follow the equipment’s operating manual and guidelines to ensure that adjustments are made within the allowable range and to avoid damage or potential safety risks to the equipment.
In summary, considering the characteristics of materials and cutting requirements is an important step in adjusting the parameters of laser cutting machines. By fully understanding the characteristics of materials, clarifying cutting requirements, gradually trying and adjusting parameters, and referring to manufacturer’s suggestions and consulting professional opinions, you can find the best parameter combination to improve cutting efficiency and meet application needs.