Effectively cleaning the oil electric servo bending machine is a key step in ensuring its normal operation and extending its service life. Here are some effective cleaning methods and precautions to help you properly clean your equipment:
**1、 Preparation work before cleaning**
1. * * Power off and confirm safety * *: Before starting cleaning, ensure that the oil electric servo bending machine is completely powered off and that the moving parts inside the machine have completely stopped moving to prevent accidents.
2. * * Prepare cleaning tools and materials * *: According to the cleaning needs, prepare suitable cleaning tools such as soft cloths, sponges, brushes, etc., as well as appropriate cleaning agents such as neutral detergents or specialized mechanical cleaning agents. Avoid using cleaning agents that contain strong acids, bases, or corrosive substances to prevent damage to the surface of the equipment.
**2、 External cleaning**
1. * * Surface dust removal * *: Use a soft cloth or vacuum cleaner to remove dust and debris from the surface of the equipment. For difficult to reach corners and gaps, brushes or compressed air can be used for cleaning.
2. * * Clean oil stains * *: For oil stains on the surface of the equipment, you can use an appropriate amount of cleaning agent to spray on a soft cloth, and then gently wipe it off. Be careful to prevent cleaning agents from entering the interior of the equipment or coming into contact with electrical components.
**3、 Electrical cleaning**
1. * * Dust protection * *: Check whether the dust covers or seals of the electrical box and electrical components are intact. If there is any damage, replace them in a timely manner.
2. * * Dust removal * *: Use a vacuum cleaner or soft brush to remove dust and debris from the inside of the electrical box, ensuring that there is no dust accumulation on the surface of electrical components.
3. * * Check wiring * *: Check if the electrical wiring and terminals are loose or damaged, and if necessary, tighten or replace them.
**4、 Maintenance of lubrication parts**
1. * * Classified storage of lubricants * *: Ensure that different types of lubricants are stored separately to avoid confusion.
2. * * Add lubricant in moderation * *: According to the lubrication requirements of the equipment, use an appropriate amount of lubricant to add oil to the lubrication area. Be careful to avoid excessive addition to prevent contamination or damage to the equipment.
**5、 Other precautions**
1. * * Avoid liquid entering the interior of the equipment * *: During the cleaning process, special attention should be paid to preventing liquids (such as water, cleaning agents, etc.) from entering the interior of the equipment, especially the electrical parts and lubrication system.
2. * * Keep Dry * *: After cleaning, use a dry cloth to wipe the surface of the equipment to ensure dryness and prevent moisture residue from causing rusting or damage.
3. Regular Maintenance: In addition to daily cleaning, regular maintenance should also be carried out in accordance with the requirements of the equipment maintenance manual, including replacing worn parts, inspecting fasteners, etc., to ensure the normal operation of the equipment and extend its service life.
In summary, effective cleaning of the oil electric servo bending machine requires preparation before cleaning, following the correct steps for external cleaning, electrical cleaning, and lubrication maintenance, and paying attention to avoiding liquid entering the equipment and keeping the equipment dry. Regular cleaning and maintenance can ensure the normal operation of equipment, extend its service life, and improve production efficiency.
How can Manhart (Guangdong) CNC Machine Tool Co., Ltd. effectively clean the oil electric servo bending machine?
01
6 月