Manhart (Guangdong) CNC Machine Tool Co., Ltd. Pipe Cutting Machine Safety Operation and Maintenance Regulations

**Safety operation and maintenance regulations for pipe cutting machines**
1、 Safety operating procedures
1. * * Wear protective equipment**
Before operating the pipe cutting machine, operators must wear prescribed protective equipment, including but not limited to safety helmets, protective goggles, earplugs, protective gloves, and work clothes. These protective equipment can effectively reduce the harm of splashes, noise, and dust to operators, ensuring operational safety.
2. * * Non operators are prohibited from making adjustments**
The adjustment and operation of the pipe cutting machine are limited to operators who have received professional training. Non operators are prohibited from adjusting equipment parameters or performing other operations without authorization to avoid accidents caused by misoperation.
3. * * Lubrication inspection before startup**
Before each startup, the operator should check the lubrication system of the equipment to ensure that each lubrication point is adequately lubricated. Poor lubrication may lead to increased equipment wear and even cause malfunctions.
4. * * Prohibit pressing the clamping button without a tube**
Before cutting the pipe, it is necessary to ensure that the pipe is correctly placed in the cutting position and it is prohibited to press the clamping button without the pipe. Otherwise, it may cause equipment damage or operator injury.
5. * * Prohibit leaving the operating position**
When operating the pipe cutting machine, the operator should always stay at the operating position and is strictly prohibited from leaving during the operation. If you need to leave, you must stop the machine and cut off the power.
6. * * Prohibit direct cleaning of iron filings**
When cleaning the iron filings generated by the pipe cutting machine, direct contact with hands or other tools is prohibited. Special tools or vacuum cleaners should be used for cleaning to avoid scratches or injuries.
7. * * Loading and unloading with light handling**
During the loading and unloading process of the pipe cutting machine, operators should handle it with care to avoid impact or damage to the equipment. At the same time, the operating area should be kept clean to prevent debris from affecting operational safety.
2、 Maintenance regulations
1. * * Regular inspection and maintenance**
Regularly inspect and maintain the pipe cutting machine to ensure that the equipment is in good working condition. The inspection content includes but is not limited to electrical systems, transmission systems, cutting tools, etc.
2. * * Clean the cutting section**
Regularly clean the cutting section to remove accumulated dust and iron filings. Keeping the cutting section clean can improve cutting quality and extend the service life of the equipment.
3. * * Check the wear of the cutting tools**
Regularly check the wear of cutting tools. Once severe wear or defects are found, new tools should be replaced in a timely manner. The use of severely worn cutting tools may lead to a decrease in cutting quality or equipment failure.
4. * * Check the electrical and lubrication system**
Regularly check the working status of the electrical and lubrication systems to ensure their normal operation. If any abnormalities or malfunctions are found, the machine should be shut down promptly for handling.
5. * * Tighten all components**
Regularly tighten all components of the pipe cutting machine to prevent equipment failure or safety hazards caused by looseness. During the tightening process, attention should be paid to using appropriate tools and following the correct operating sequence.
By following the above safety operation and maintenance regulations, we can effectively ensure the safe and stable operation of the pipe cutting machine, while extending the service life of the equipment and improving production efficiency.