Manhart数控机床折弯机用途

When using the Manhart CNC bending machine, the following are some important safety and operational precautions:

1. * * Preparation work * *: Ensure that the work area is clean and free of debris. Wear appropriate protective equipment, such as safety shoes, gloves, and goggles.

2. * * Check the machine status * *: Before use, it is necessary to check whether the bending machine is working properly. Check if all switches and indicator lights are functioning properly and there are no abnormal noises or vibrations.

3. Preparation of board: Ensure that the size and thickness of the board meet the requirements and there are no obvious defects. When placing the sheet metal on the bending machine, ensure that it is stable and does not move.

4. * * Adjusting the bending machine * *: Adjust the angle and size of the bending machine as needed. Ensure that all settings meet the requirements of the drawings.

5. * * Start bending * *: After confirming that all settings are correct, turn on the bending machine and start the bending operation. Keep the operation stable and avoid sudden starts or stops.

6. * * Observe machine response * *: During the bending process, pay attention to the machine’s response. If any abnormalities are found, such as noise, vibration, or high temperature, the operation should be stopped immediately, and the problem should be checked and resolved.

7. After the operation is completed, turn off the bending machine and clean the working area. Check if the board meets the requirements, and if there are any issues, adjustments need to be made.

8. * * Regular Maintenance * *: Regular maintenance and upkeep of the bending machine to ensure its normal operation. This includes cleaning, lubrication, and checking the wear of components.

9. * * Comply with operating procedures * *: During use, follow the operating procedures and recommendations provided by the manufacturer. Do not attempt operations beyond the machine’s capabilities.

10. * * Pay attention to power and air supply * *: Ensure that the power and air supply connections of the bending machine are stable and there are no leaks or damage. Regularly inspect the wires and trachea for damage or aging.

Following these steps and precautions can help you maintain safety and obtain accurate bending results when using the Manhart CNC bending machine.