English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog Adjusting the bending wheel is an important task in the maintenance of CNC bending machines, aimed at ensuring the accuracy and performance of the bending wheel. The following are the steps to be followed for adjusting the bending wheel:
1. * * Prepare tools and materials * *:
Prepare necessary tools such as screwdrivers, wrenches, micrometers, vernier calipers, etc., as well as components that may need to be replaced.
2. * * Check and confirm issues * *:
Firstly, confirm if the bending wheel needs to be adjusted. This can be judged by checking the accuracy, wear, clearance, etc. of the rolling and bending wheels. If there are problems with the bending wheel, such as accuracy deviation, severe wear, or excessive clearance, then adjustments need to be made.
3. * * Turn off the power and remove the power * *:
Before making any adjustments, it is necessary to ensure that the power of the CNC bending machine is turned off and the relevant power is released to avoid accidents.
4. * * Dismantling and Inspection of Roll Bending Wheels * *:
According to the manufacturer’s provided operating manual or guide, correctly disassemble the bending wheel. Conduct a detailed inspection of the bending wheel and record any wear, damage, or abnormal conditions.
5. Cleaning and repairing:
Use appropriate cleaning agents to clean the surface and interior of the bending wheel, removing oil and impurities. If damage or wear is found on the bending wheel, you can try repairing or replacing the relevant components.
6. * * Adjust position and clearance * *:
Based on the inspection results, use appropriate tools to adjust the position, angle, and clearance of the bending wheel. Ensure a tight and smooth fit between the bending wheel and other related components.
7. * * Reinstall and secure * *:
Reinstall the adjusted bending wheel onto the CNC bending machine and secure it with appropriate fasteners. Ensure that the roll bending wheel is securely installed and will not loosen or fall off.
8. * * Inspection and Testing * *:
Restart the CNC bending machine and perform necessary tests and adjustments. Check whether the accuracy and performance of the bending wheel meet the requirements. If any issues are found, repeat the above steps for adjustment.
9. * * Record and Adjust Plan * *:
Record the process and results of this adjustment, including replaced components, adjusted parameters, etc. Based on the usage and maintenance plan of the bending wheel, develop a schedule for the next adjustment.
Please note that adjusting the bending wheel is a highly professional and technical task, and it is recommended to have experienced technicians or manufacturer’s after-sales service personnel perform it. At the same time, it is essential to refer to the equipment’s operating manual or maintenance guide to ensure safety and accurate adjustment.
