English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog Operating procedures for laser cutting machines
1、 Preparation work
1. Confirm the safety of the work environment and avoid hazards such as moisture, flammability, and explosion.
2. Wear personal protective equipment that complies with regulations, including protective goggles, protective gloves, etc.
3. Check whether the external facilities such as power and gas sources of the laser cutting machine are normal.
2、 Power on inspection
1. Turn on the power switch of the laser cutting machine and check if the equipment is running properly.
2. Check whether the operating system and control system of the cutting machine are normal, and whether there are any abnormal prompts or alarm messages.
3. Conduct a preliminary inspection of the transmission components, guide rails, etc. of the cutting machine to ensure that there is no jamming or abnormal phenomenon.
3、 Material preparation
According to the processing requirements, prepare the materials to be cut and check if the quality of the materials meets the requirements.
2. Place the material on the workbench of the cutting machine and secure it to avoid movement or deviation during the cutting process.
4、 Parameter settings
1. Set appropriate cutting parameters in the control system based on the properties, thickness, and cutting requirements of the material, including laser power, cutting speed, gas pressure, etc.
2. Preview and confirm the set parameters to ensure accuracy.
5、 Start cutting
1. Confirm that the distance between the cutting head and the material is appropriate, avoiding being too close or too far.
2. Press the start button to start the cutting program.
6、 Cutting process
1. During the cutting process, closely monitor the working status of the cutting machine to ensure the normal operation of the equipment.
2. Pay attention to the cutting quality, and if any abnormalities or quality issues are found, stop the machine for inspection in a timely manner.
3. Avoid opening the cutting chamber door or touching the cutting area during the cutting process to prevent damage from laser radiation and splashes.
7、 Cutting completed
After the cutting program is completed, the laser cutting machine will automatically stop working.
2. Check the cutting quality to ensure that the expected processing effect is achieved.
8、 Shutdown and cleaning
1. Turn off the power of the laser cutting machine and disconnect external facilities.
2. Clean the cutting machine, remove residues and debris from the workbench, and keep the equipment clean.
3. Check if all components of the equipment are intact, and repair or replace them in a timely manner if there are any problems.
The above are the basic operating procedures for laser cutting machines. Operators should strictly follow the procedures to ensure the normal operation of the equipment and personal safety. During the operation, if any problems or abnormal situations are encountered, the machine should be shut down in a timely manner and professional assistance should be sought.
