What details should be paid attention to when adjusting the rubber ring of the CNC rolling and bending machine?

The adjustment of the rubber ring of the CNC rolling and bending machine is a delicate and important process, and the following details need to be noted to ensure the accuracy and safety of the adjustment:
1. * * Safe operation * *:
-Before making any adjustments, ensure that the machine comes to a complete stop and the power is disconnected to avoid accidental start-up and injury.
-Wear appropriate safety protective equipment, such as gloves, goggles, etc.
2. * * Check the condition of the rubber ring * *:
-Carefully inspect the rubber ring for signs of wear, aging, cracking, or deformation. If there are these problems, the rubber ring should be replaced in a timely manner.
-Check if the size and specifications of the rubber ring match the machine requirements.
3. * * Cleaning work * *:
-Before adjustment, clean the working surface and rubber ring of the bending machine to remove oil, dust, and other impurities, ensuring good contact and friction.
4. * * Parallelism and spacing * *:
-When adjusting the rubber ring, make sure it is parallel to the working surface of the bending machine to avoid tilting or distortion.
-Maintain an appropriate distance between the rubber ring and the working surface to form a uniform pressure distribution during the rolling process.
5. * * Uniform force * *:
-Ensure that the rubber ring can receive uniform force during the rolling process, avoiding rolling defects caused by uneven force distribution.
-Check the pressure distribution device of the roll bending machine to ensure its normal operation and the ability to provide stable pressure.
6. * * Gradual adjustment * *:
-When adjusting the rubber ring, do not adjust it too much at once. Instead, make gradual adjustments and observe the changes in the bending effect.
-After each adjustment, conduct a trial run to verify the adjustment effect and make further adjustments as needed.
7. * * Follow the instructions * *:
-Carefully read the user manual of the CNC bending machine and understand the adjustment guidelines and precautions provided by the manufacturer.
-Follow the steps and requirements in the manual to make adjustments, and do not arbitrarily change the structure or parameters of the machine.
8. * * Records and Adjustment Records * *:
-During the adjustment process, record the parameters and results of each adjustment for future reference and comparison.
-If the desired bending effect cannot be achieved after adjustment, it is possible to seek the help of professional technicians.
By paying attention to these details, it can be ensured that the adjustment of the rubber ring of the CNC rolling and bending machine is more accurate, safe, and effective, thereby improving the accuracy and quality of rolling and bending.