Tiếng Việt 
English 
العربية 
Français 
Русский 
简体中文 
Español de Venezuela 
Español 
Tagalog The safety operation of the CNC bending machine includes the following aspects:
1. Machine inspection and preparation:
*Before using the machine, check if it is working properly, including whether the motor, switch, circuit, and grounding are normal and secure, and whether all operating parts and buttons of the equipment are in the correct positions. If there is any malfunction or abnormality, please stop using immediately and contact professional personnel for repair.
*Clean the debris on the machine and clean the work area, keeping the ground clean and free of oil stains to prevent slipping and injury.
*Check if the position of the hydraulic oil tank cursor is in a safe position, the temperature should not be too high, and the oil volume should not be too low. When the cursor position is found to be lower than the safe position, oil should be added immediately to ensure the normal operation of the oil pressure system.
*It is also necessary to check for leaks in various parts of the hydraulic system (such as oil cylinders, oil pipes, etc.), and promptly handle any leaks found.
2. Wear safety equipment: When operating the machine, it is necessary to wear safety equipment such as gloves, safety shoes, eye masks, etc. to ensure personal safety.
3. Adhere to operating standards:
*Follow the load regulations of the machine and do not exceed its rated load.
*During the operation, do not leave the machine or hand over the operation to others.
*Operators shall be responsible for their own operations and shall not engage in any unnecessary operations or use unsafe tools on the machine.
*When operating the machine, keep your hands dry and ensure that the fixtures on the machine are securely fastened to prevent the workpiece from shifting.
*It is prohibited to reach into the interior of the machine, and it is also prohibited to perform equipment maintenance, cleaning, and other operations before the equipment stops running.
*At the end of work, the workpiece should not be placed inside the machine to avoid damage to the machine and workpiece.
4. Safety warnings and training: Each CNC bending machine should be equipped with an operating manual and safety warning signs, and operators must carefully read and strictly abide by them. In addition, relevant management personnel should strengthen safety education and training for operators, conduct regular safety inspections and identify potential safety hazards, and promptly address safety issues.
Please note that safe operation is crucial to ensuring the safety of personnel and equipment, therefore the above safety operating procedures must be strictly followed. Meanwhile, for specific operational tasks or abnormal situations, additional safety measures or adherence to specific operational guidelines may be required. Therefore, it is recommended to carefully read the relevant operating manuals and safety guidelines before operating the CNC bending machine, and to operate under the guidance of experienced operators.
