Tiếng Việt 
English 
العربية 
Français 
Русский 
简体中文 
Español de Venezuela 
Español 
Tagalog 
When maintaining the fully electric servo CNC coiling machine, attention should be paid to the following details to ensure the normal operation of the equipment and extend its service life:
### 1. Safety precautions
** * Cut off power * *: Before performing any maintenance operation, be sure to cut off the power and ensure that the equipment is in a completely stopped state to prevent accidental start-up and injury risks.
** * Protective equipment * *: Maintenance personnel should wear appropriate protective equipment, such as helmets, protective gloves, protective goggles, etc., to protect their own safety.
** * Follow operating procedures * *: Strictly follow the safety guidelines and precautions in the equipment operation manual, and do not operate in violation of regulations.
### 2. Cleaning and lubrication
** * Regular cleaning * *: Use a soft cloth to wipe the outer surface of the equipment to ensure it is free of dust and stains. Pay special attention to cleaning the dust and dirt on the motor and electrical system.
** * Check moving parts * *: Ensure that there is no sediment or blockage on the moving parts to maintain their normal operation.
*Lubricating components: According to the equipment manual, regularly apply an appropriate amount of lubricating oil or grease to the moving parts to reduce wear and friction.
### 3. Power and electrical system maintenance
** * Check the power cord * *: Regularly check if the power cord is damaged, and replace it promptly if it is damaged.
** * Tightening Connection * *: Ensure the connection of the electrical system is stable. If there is any looseness or detachment, necessary tightening and repair should be carried out.
** * Check fuses * *: Regularly check the fuses in the electrical system and replace them promptly if they are damaged.
*Troubleshooting: If any faults or abnormalities are found in the electrical system, the machine should be stopped immediately and professional assistance should be sought.
### 4. Mechanical component maintenance
*Check for wear: Regularly inspect the mechanical components of the rounding machine, such as belts, gears, transmission chains, etc., for wear or looseness.
*Repair and replacement: If damage or malfunction of mechanical components is found, the machine should be stopped and professional assistance should be sought for repair or replacement.
### 5. Regular inspection and calibration
** * Follow the manual * *: Regularly inspect and calibrate the rolling machine according to the equipment manual.
*Check parameters and indicators: Ensure that all indicators and parameters of the equipment are in normal condition, and adjust and repair them promptly if there are any abnormalities.
### 6. Recording and maintenance
** * Detailed Record * *: Record in detail the maintenance and upkeep of the rolling machine, including maintenance time, maintenance content, replacement parts, and other information, in order to view and analyze the maintenance status of the equipment.
### 7. Servo motor maintenance
** * Regular Inspection * *: Conduct regular inspections on servo motors, including appearance, screws, wiring, bearings, insulation, etc., to ensure their normal operation.
*Cleaning and Lubrication: Regularly clean the servo motor and its surroundings of dust and debris to maintain cleanliness. For lubrication parts such as bearings, screws, etc., lubricant should be added regularly.
### 8. environmental factor
** * Keep the environment clean * *: Avoid dust, debris, etc. from entering the interior of the equipment, which can affect its performance and lifespan.
*Appropriate temperature and humidity: Ensure that the equipment is in a suitable working environment and avoid damage caused by excessively high or low temperature and humidity.
By following the above details and precautions, the maintenance and upkeep of the fully electric servo CNC coiling machine can be effectively carried out, ensuring its stable operation and extending its service life.