Manhart Specification for safe use of coiling machines

**Specification for safe use of coiling machines**
1、 Chuẩn bị trước khi vận hành
Before starting to operate the rounding machine, the operator must be familiar with the operating manual and safety guidelines of the rounding machine to ensure understanding of all functions, controls, and operating methods of the equipment.
2. Check whether the power supply, air source, and other power sources of the rounding machine are normal to ensure the normal start-up and stable operation of the equipment.
3. Clean and inspect the key parts of the equipment, such as the workbench, fixtures, and rollers, to ensure that there are no debris or damage, and provide necessary lubrication.
4. Wear prescribed protective equipment, such as safety shoes, work clothes, goggles, and protective gloves.
2、 Operational safety
During the operation, the operator should always stand in the safe area of the equipment and avoid contact with the moving parts of the equipment.
2. Strictly follow the operating procedures and do not change the working parameters or operating procedures of the equipment at will.
3. Cleaning, maintenance and other work are prohibited during the operation of the equipment. It must be stopped and the power must be cut off before proceeding.
4. Overloading of equipment is prohibited to ensure that the size, weight, and hardness of the processed materials meet the specifications of the equipment.
During the operation, if there is any abnormal sound, vibration, or odor, the machine should be stopped immediately for inspection, and the fault should be eliminated before continuing the operation.
3、 Installation and Maintenance
1. The installation of equipment should strictly follow the installation guidelines to ensure the stability and accuracy of the equipment.
2. Regularly maintain and upkeep the moving parts, lubrication system, and electrical system of the equipment to maintain its good condition.
During the use of the equipment, if any faults or abnormal situations are found, professional personnel should be notified in a timely manner for maintenance and inspection.
4. The maintenance and repair of equipment should be carried out by professional personnel, and non professional personnel are prohibited from dismantling or repairing the equipment without authorization.
4、 Emergency measures
During the use of the equipment, in case of emergencies such as fire or leakage, the power and gas sources should be immediately cut off, and corresponding fire extinguishing equipment should be used for firefighting or emergency response.
When an emergency occurs, one should remain calm, handle it according to the emergency plan, and promptly notify relevant personnel and departments.
5、 Post operation cleaning
After completing the operation, the equipment should be thoroughly cleaned and inspected to ensure that it is in a clean and tidy state.
2. The cleaning work should include the cleaning of key parts such as the workbench, fixtures, and rollers, and the removal of residual oil stains, waste materials, etc.
During the cleaning process, attention should be paid to avoiding contact with moving parts of the equipment to ensure safety.
6、 Precautions
1. The operator shall strictly comply with the provisions and requirements of this specification to ensure the safe operation of the equipment.
2. It is prohibited to stack debris or flammable materials around the equipment, and to maintain a clean and safe environment around the equipment.
Before using the equipment, it is necessary to confirm that all safety protection devices are in normal condition and not to dismantle or stop using them without authorization.
4. It is prohibited to leave the work position or engage in other activities unrelated to operation during the operation of the equipment.
5. Operators should regularly self check and self inspect the equipment to ensure its normal operation and safe use.