Chưa được phân loại

How to use the fully electric servo CNC rolling machine of Manhart (Guangdong) CNC Machine Tool Co., Ltd?

The usage steps of the fully electric servo CNC rolling machine are as follows:
1. Check the equipment and confirm that it is powered on and the controller is working properly.
2. Clean the working platform and auxiliary equipment of the rolling machine, and confirm that the operators have worn work clothes and safety helmets.
3. Open the controller, enter the cutting program, and input the cutting data, including material length, thickness, width, etc.
4. Place the sheet metal flat on the rolling machine, adjust the cutting angle, and align the material head with the locator.
5. Start the CNC rolling machine to start cutting. During the cutting process, the operator should observe the operation of the equipment in a timely manner to prevent abnormal situations and stop the machine in a timely manner.
6. Choose the most suitable rolling method for the equipment as needed, adjust the position of the roller shaft and guide roller to match the thickness and width.
7. Start the plate rolling machine, place the prepared sheet metal into the equipment, and press it tightly against the guide roller.
8. Observe the entire rolling process to ensure the smooth completion of the rolling plate.
9. After completing the rolling process, promptly turn on the controller to stop the rolling machine from working.
The above steps are for reference only. Different brands of fully electric servo CNC rolling machines may vary, and the specific usage steps should be based on the equipment’s operation manual. During use, it is important to pay attention to safety, follow the safety operating procedures of the equipment, and ensure personal safety and normal operation of the equipment.