Manhart Safety precautions for CNC downward bending machine

**Safety operating procedures and precautions for CNC downward bending machine**
1、 Giới thiệu
As an important equipment in modern metal processing, the safety of the CNC downward bending machine during its operation is crucial. This document aims to provide safety operating procedures and precautions for CNC downward bending machines, to ensure the normal operation of the equipment and reduce the possibility of accidents.
2、 Preparation work before equipment operation
1. The operator should be familiar with the structure, performance, and safety operating procedures of the equipment, and untrained and qualified personnel are not allowed to operate the equipment.
2. Before operation, a comprehensive inspection of the equipment should be carried out, including power supply, lubrication system, hydraulic system, control system, etc., to ensure that the equipment is in good condition.
3. Check if the safety protection devices are complete and effective, such as safety doors, emergency stop buttons, etc., to ensure that they can respond quickly and effectively in emergency situations.
4. Ensure that there are no debris in the operating area to avoid accidents such as collisions or falls during operation.
3、 Correctly turning on and off devices
Before turning on the equipment, it is necessary to confirm that each control switch is in the correct position to avoid equipment malfunctions caused by misoperation.
After turning on the device, wait for the device self check to complete and confirm that there are no abnormalities before proceeding with further operations.
When shutting down the equipment, each system should be gradually shut down according to the operating procedures to ensure safe shutdown of the equipment.
4、 Safety regulations and precautions during operation
During the operation, the operator should concentrate and not leave the operating position or engage in activities unrelated to the operation.
2. Overloading, speeding, and exceeding the range of equipment usage are prohibited, ensuring that the equipment operates within the rated parameter range.
3. Cleaning, adjustment, or maintenance work is prohibited during the operation of the equipment. If such work is required, the machine should be shut down and the power should be cut off.
4. It is prohibited to change equipment parameters or control programs arbitrarily. If changes are needed, they should be made under the guidance of professional technical personnel.
5、 Common troubleshooting and handling methods
1. Operators should be familiar with common equipment faults and their troubleshooting methods. When encountering faults, they should quickly locate them and take effective measures.
For faults that cannot be resolved on their own, professional technicians should be contacted in a timely manner for repair.
6、 Recommended maintenance measures and cycles
1. Regularly clean, lubricate, tighten and maintain the equipment to ensure that it is in good condition.
2. Based on equipment usage and manufacturer recommendations, establish a reasonable maintenance cycle and strictly implement it.
During the maintenance process, relevant safety regulations should be followed to ensure the safety of operators and equipment.
7、 Guidelines and standards for using cutting tools and fixtures
1. Select cutting tools and fixtures that meet equipment requirements to ensure their quality and accuracy meet production requirements.
When using cutting tools and fixtures, relevant operating procedures and safety regulations should be strictly followed.
3. Regularly inspect and replace cutting tools and fixtures to avoid equipment failure or safety accidents caused by wear or damage.
8、 Emergency response measures and emergency stop operation methods
When equipment malfunctions or encounters an emergency situation, emergency measures should be taken immediately to ensure the safety of equipment and personnel.
2. Familiarize oneself with the position and operation method of the emergency stop button, and in case of an emergency, quickly press the button to stop the equipment from running.
3. Regularly inspect and maintain the emergency stop device to ensure its normal and reliable function.
9、 Enhance the safety awareness of operators themselves
1. Operators should always remain vigilant and pay attention to the operating status of the equipment and changes in the surrounding environment.
2. Strengthen safety training and skill learning, improve one’s own safety awareness and ability to respond to emergencies.
3. Comply with relevant safety regulations and operating procedures, and strictly prohibit illegal and risky operations.