Tiếng Việt 
English 
العربية 
Français 
Русский 
简体中文 
Español de Venezuela 
Español 
Tagalog Proper maintenance and upkeep of the electro-hydraulic servo CNC bending machine is the key to ensuring its stable operation and extending its service life. Here are some key maintenance and upkeep steps:
1. Daily cleaning and inspection:
-Before daily operation, foreign objects, metal debris, and other residues should be removed from the machine tool and mold, and thoroughly cleaned using tools such as brushes and vacuum cleaners.
-Check if the mold is securely installed, and if the electrical switches and cable fasteners are abnormal or loose.
-Check the external and internal parts of the equipment for oil stains, residues, etc., and clean them in a timely manner.
2. * * Hydraulic oil management * *:
-Hydraulic oil is a key component of the electro-hydraulic servo CNC bending machine, and its quality directly affects the performance and service life of the equipment. Therefore, hydraulic oil should be replaced regularly, and it is recommended to replace it every six months or according to equipment usage.
-When replacing hydraulic oil, it is necessary to use a suitable oil filter for filtration to ensure the purity of the oil quality.
-Regularly check the oil level in the fuel tank. If the oil level is below the standard, hydraulic oil should be added in a timely manner.
3. Maintenance of lubrication system:
-According to the lubrication requirements of the equipment, regularly add lubricating oil to each lubrication point to ensure that the moving parts of the equipment are adequately lubricated.
-Regularly check the working status of the lubrication system to ensure smooth supply and circulation of lubricating oil.
4. Maintenance of electrical and mechanical components:
-Regularly inspect the electrical system, including the motor, wiring, switches, and other parts, to ensure its normal operation without any abnormal heating or damage.
-Check mechanical components, such as transmission devices, slides, rollers, etc., to ensure that they operate flexibly and without any jamming.
-For pneumatic systems, check components such as cylinders, air pipes, and pressure regulators to ensure their normal operation.
5. * * Avoid Overloading * *:
-Overloading of equipment is strictly prohibited to avoid causing excessive load on the machine tool, affecting its service life and performance.
-During the operation, operators should always pay attention to the operating status of the equipment. If there are any abnormalities, they should immediately stop the machine for inspection.
6. * * Training and Records * *:
-Provide professional training to operators to enable them to master the correct operation and maintenance methods.
-Establish equipment maintenance records, regularly record the maintenance and troubleshooting of equipment, in order to promptly identify problems and take corresponding measures.
7. * * Environment and Safety * *:
-Keep the working environment of the equipment clean and dry, and avoid damage to the equipment caused by water vapor, corrosive agents, etc.
-During maintenance and upkeep, pay attention to personal safety and follow relevant safety operating procedures.
By following the above maintenance and upkeep steps, the stable operation of the electro-hydraulic servo CNC bending machine can be ensured, its service life can be extended, and production efficiency can be improved. At the same time, it also helps to reduce equipment failures and maintenance costs, and improve the economic benefits of enterprises.
