How does Manhattan (Guangdong) CNC Machine Tool Co., Ltd. regularly maintain and maintain its molds to ensure their good working condition and extend their service life?

Regular maintenance and upkeep of the mold is key to ensuring its good working condition and extending its service life. Here are some suggestions and measures for regular mold maintenance and care:
1. **Clean the mold regularly**:
– Use a soft cloth or sponge to remove dust, oil and impurities from the mold surface.
– For oil stains that are difficult to clean, special mold cleaners or solvents can be used to clean them.
– Make sure the mold surface is dry after cleaning to avoid rust.
2. **Check mold status**:
– Inspect the surface condition of the mold for cracks, scuffs, dents or other damage.
– Check the mating surfaces and positioning devices of the mold to make sure they are not worn or loose.
3. **Lubrication and Maintenance**:
– Apply or spray lubricant or rust inhibitor regularly according to the mold’s instructions and manufacturer’s recommendations.
– The selection of lubricant should be determined according to the material of the mold, working environment and frequency of use.
4. **Storage and Protection**:
– When molds are not in use, make sure they are stored in a dry, ventilated, dust-free environment.
– Avoid exposing mold to direct sunlight, high temperature or moisture.
– If the mold needs to be stored for a long time, it should be protected with rust inhibitor or protective cover.
5. **Regular calibration and adjustment**:
– Regularly calibrate the mold to ensure that the dimensional accuracy and fit clearance meet the requirements.
– For precision molds, it is recommended to perform regular accuracy testing and calibration.
6. **Training and Operating Specifications**:
– Make sure the operator is familiar with the use and precautions of the mold.
– Follow the operating instructions and avoid excessive force, impact or incorrect operation.
7. **Recording and Tracking**:
– Establish maintenance and upkeep records for molds, recording the date and operator of each cleaning, lubrication, calibration and adjustment.
– Through recording and tracking, potential problems with the mold can be discovered in time and corresponding measures can be taken.
8. **Timely repair and replacement**:
– Once the mold is found to be damaged or worn, it should be repaired or replaced in time.
– When repairing or replacing molds, you should choose a qualified repair service provider or manufacturer to ensure the quality of the repair and the accuracy of the mold.
Regular maintenance and care of molds is an ongoing process that requires patience and care. By following the above recommendations and measures, you can ensure that your mold is in good working order and extend its service life. At the same time, production efficiency and product quality can also be improved.