Tiếng Việt 
English 
العربية 
Français 
Русский 
简体中文 
Español de Venezuela 
Español 
Tagalog The safety operating procedures for the surround type dual platform laser cutting machine mainly include the following aspects:
1. Operators must undergo professional training, be familiar with the structure and performance of the equipment, master relevant knowledge of the operating system, and ensure that they can operate the equipment correctly and safely.
Before operating the equipment, operators need to wear labor protection equipment according to regulations, especially when working near the laser beam, they must wear protective glasses that comply with regulations to prevent laser radiation from causing harm to the eyes.
Before starting the equipment, it is necessary to check whether the various safety protection devices of the laser cutting machine are intact and in normal working condition to ensure the safety of the equipment.
When setting cutting parameters, appropriate parameters should be selected based on the type and requirements of the workpiece to avoid the generation of hazardous substances such as laser radiation or smoke.
5. During cutting operations, operators must remain vigilant and pay attention to the operation of the equipment. If any abnormal situations are found, they should stop the machine for inspection in a timely manner to prevent equipment failure or personal injury.
6. When the equipment is in operation, operators are not allowed to leave their posts or entrust someone to be in charge without authorization. If it is necessary to leave, the machine should be shut down or the power switch should be cut off.
During the processing, the fire extinguisher should be placed within easy reach. When not processing, the laser or shutter should be turned off. Do not place paper, cloth, or other flammable materials near unprotected laser beams to prevent fire accidents.
8. It is necessary to keep the laser, bed, and surrounding area clean, orderly, and free of oil stains. Workpieces, boards, and waste materials should be stacked according to regulations to ensure the normal operation of equipment and the safety of the working environment.
When using gas cylinders, it is important to avoid damaging welding wires to prevent electric leakage accidents. The use and transportation of gas cylinders should comply with the gas cylinder supervision regulations, and it is prohibited for gas cylinders to be exposed to sunlight or close to heat sources. When opening the bottle valve, the operator must stand on the side of the bottle nozzle to prevent dangerous situations such as gas cylinder explosions.
The above are some basic safety operating procedures for the surround type dual platform laser cutting machine. Operators should strictly follow them in actual operation to ensure their own and others’ safety. At the same time, regular maintenance and upkeep of equipment can also extend its service life and improve its stability.
