Tiếng Việt 
English 
العربية 
Français 
Русский 
简体中文 
Español de Venezuela 
Español 
Tagalog After replacing the roll bending wheel, a series of inspections and tests are required to verify its adaptability and ensure that the new roll bending wheel can meet the requirements of the production process. Here are some commonly used inspection methods:
1. * * Appearance inspection * *:
Firstly, visually inspect the newly installed bending wheel to confirm that there are no obvious defects, cracks, or damage on its surface. At the same time, check if the installation of the bending wheel is firm and there is no shaking or abnormal noise.
2. * * Size measurement * *:
Use measuring tools such as vernier calipers and micrometers to measure the key dimensions of the new bending wheel, such as outer diameter, inner diameter, width, etc. Compare these measurement results with the process requirements to ensure that the dimensions of the new rolling and bending wheel meet the specifications.
3. * * Roundness detection * *:
Use a roundness measuring instrument or laser rangefinder to check the roundness of the new rolling and bending wheel. Roundness error is one of the important parameters in the rolling process, so it is very important to ensure that the roundness of the new rolling wheel is within the allowable range.
4. * * Material hardness testing * *:
If possible, perform hardness testing on the material of the new roll bending wheel. Through hardness testing, the wear resistance and service life of the rolling and bending wheel can be understood, in order to determine whether it is suitable for the current production environment.
5. * * Trial operation * *:
Test run the new rolling and bending wheel in the actual production environment. During the trial operation, closely monitor the operation of the bending wheel, such as whether it is stable, whether there are abnormal noises, and whether it meets the process requirements. At the same time, record various parameters during the trial operation process, such as machining speed, machining accuracy, etc., for subsequent analysis and optimization.
6. * * Processing quality inspection * *:
After trial operation, conduct quality inspection on the products processed by the new rolling and bending wheel. The inspection content includes the dimensional accuracy, surface quality, bending angle, etc. of the product. If the inspection results meet the process requirements, it can be considered that the adaptability of the new rolling and bending wheel is good.
7. Regular maintenance and inspection:
Even if the new bending wheel passes the above inspection and testing, it still needs to be regularly maintained and inspected. By regularly inspecting and recording the wear and operation status of the rolling and bending wheels, problems can be identified and resolved in a timely manner, ensuring that the rolling and bending wheels always remain in good working condition.
In summary, the adaptability inspection after the replacement of the rolling and bending wheel is a comprehensive process that requires evaluation from multiple aspects such as appearance inspection, size measurement, roundness testing, material hardness testing, trial operation, and machining quality inspection. Through these inspection methods, it can be ensured that the new rolling and bending wheel can meet the requirements of the production process, improve production efficiency and product quality.
