Tiếng Việt 
English 
العربية 
Français 
Русский 
简体中文 
Español de Venezuela 
Español 
Tagalog Overheating of the punching and shearing machine may be caused by various reasons. The following are treatment methods for different reasons:
1. Power supply issue: First, check whether the power supply of the punching and shearing machine is connected properly, whether the plug is plugged in tightly, and whether the power switch is turned on. If there is a problem with the power supply, it should be resolved promptly.
2. Fuses and motors: Check if the fuses of the punching and shearing machine are burned out. If they are burned out, they need to be replaced with new fuses. At the same time, check if there are any abnormalities in the motor, such as abnormal motor operation, motor malfunction, motor overheating, etc. If there are any abnormalities, the power circuit should be checked, the motor winding should be repaired, and the motor bearings should be replaced. Before carrying out repairs, be sure to cut off the power supply and ensure safe operation.
3. Hydraulic system: The hydraulic system of the punching and shearing machine may also cause overheating problems. Common hydraulic system failures include hydraulic pump malfunction, high hydraulic oil temperature, hydraulic cylinder oil leakage, etc. For these issues, you can check the oil level and quality of the hydraulic system, clean the hydraulic pump, replace seals, etc.
4. Tool issue: Check if the cutting tools of the punching and shearing machine are dull or stuck. If the tools are dull or stuck, it can increase the machine load and cause overheating. At this point, it is necessary to replace the tool with a new one or clean the tool.
5. Cooling system: Check if the cooling system of the punching and shearing machine is working properly. If there is a malfunction in the cooling system, it should be repaired or replaced in a timely manner.
If none of the above methods solve the problem, it is recommended to contact the manufacturer or after-sales service center of the punching and shearing machine for professional repair assistance. At the same time, when operating the punching and shearing machine, it is necessary to pay attention to safety, follow operating procedures, and avoid accidents.
