What details should Manhart (Guangdong) CNC Machine Tool Co., Ltd. pay attention to during the use of the bending machine?

When using a bending machine, attention should be paid to the following details:

1. Before operation, familiarize yourself with the machine’s user manual and precautions, and follow relevant operating procedures.

Before each use of the bending machine, it is necessary to check whether all components of the machine are intact and carry out necessary maintenance to ensure the normal operation of the machine. Pay special attention to the addition of lubricating oil and grease, as well as the cleaning of the machine.

The preparation of materials is also very important. Suitable materials need to be selected and cut into appropriate sizes. Then, the cut material is deburred to ensure a smooth surface, which can avoid unnecessary resistance or damage during the bending process.

When using a bending machine, it is necessary to adjust the height and angle of the workbench to adapt to the workpiece being processed. When adjusting the workbench, pay attention to the scale on the machine to ensure the accuracy of the adjustment.

The mold of the bending machine is a key factor that directly affects the processing effect. When selecting a mold, it is necessary to select it based on the type and thickness of the material, and adjust the angle and position of the mold as needed.

During the bending process, it is important to ensure the stability of the workpiece and avoid any deviation or sliding that may cause damage to the workpiece or machine malfunction.

7. After processing, the quality of the workpiece should be checked in a timely manner, including the bending angle, accuracy, and surface quality, to ensure that the workpiece meets the requirements.

8. Travel adjustment is also a detail that needs attention. Before bending, it is necessary to test run to ensure that there is a gap in the thickness of the plate when the upper mold of the bending machine descends to the bottom, otherwise it will cause damage to the mold and machine.

9. The selection of bending grooves is also important, generally choosing a groove with a width of 10 times the thickness of the plate. For example, when bending a 4mm sheet metal, a groove of around 40 needs to be selected. A board with a maximum groove of 10mm can be folded, and boards exceeding 10mm are not allowed to be used.

10. The rear material adjustment generally includes electric quick adjustment and manual fine adjustment, which can be adjusted as needed.

In general, there are many details to pay attention to when using a bending machine, including machine maintenance, material preparation, workbench adjustment, mold selection, workpiece stability, stroke adjustment, groove selection, and rear stopper adjustment. Only by paying attention to these details can we ensure the normal operation of the bending machine, improve production efficiency, and ensure the quality and safety of the workpiece.