Tagalog 
English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español The installation and replacement of the cutting blade of the pipe cutting machine are key steps to ensure the normal operation of the equipment and cutting quality. The following are some details that need to be noted:
When installing the blade:
1. Ensure that the direction and position of the blade are correct, and install it according to the user manual of the pipe cutting machine. When installing the blades on an electric pipe cutting machine, special attention should be paid to the direction of the blades to avoid damaging the equipment.
2. The blade should be located in the center of the pipe with a margin of approximately 1mm to avoid excessive wear of the blade.
3. Be careful during the installation process to avoid touching the blade with your fingers or other body parts to avoid injury.
When replacing blades:
Firstly, ensure that the pipe cutting machine has stopped running and disconnect the power supply to prevent accidents from occurring.
When removing the fixing screws, use appropriate tools and be careful not to damage other components.
3. Clean the blade holder and blade installation position, ensuring that the surface is clean and dust-free to avoid dirt affecting the effectiveness of use.
When installing a new blade, ensure that its position is correct and aligned with the pipe on the cutting route to avoid unevenness or excessive gaps.
5. When tightening screws, the force should be moderate. Over tightening can cause increased blade wear, while over loosening may lead to blade detachment.
After replacing the blade, appropriate adjustments and inspections should be made to ensure that the accuracy and effectiveness of the new blade meet the requirements.
In addition, whether installing or replacing blades, relevant safety operating regulations should be followed, and necessary protective equipment should be worn, such as protective glasses, gloves, etc.
In short, for the installation and replacement of the cutting blade of the pipe cutting machine, it is necessary to take every step and detail seriously to ensure the normal operation of the equipment and cutting quality, while ensuring the safety of operators. If you are not familiar with the operation, it is recommended to seek professional assistance.
