Tagalog 
English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
During the parameter adjustment process of the hydraulic servo CNC bending machine, the following key issues need to be paid attention to to ensure the accuracy of the adjustment and the performance of the bending machine:
I. Preparation before parameter setting
1. **Clear processing requirements**: Before adjusting the parameters, the specific requirements of the processing, such as bending angle, radius, material properties, etc., must be clarified first, which will become the basis for parameter adjustment.
2. **Check the equipment status**: Ensure that the bending machine is in good working condition and that all components are not damaged or abnormal to ensure the effectiveness of parameter adjustment.
II. Precautions during parameter adjustment
1. **Select the appropriate parameter type**: In the parameter setting interface, first select the parameter type to be set, such as bending angle, bending speed, pressure, etc. Make sure that the selected parameter type matches the processing requirements.
2. **Accurately enter parameter values**: In the parameter list, find the parameter to be set and accurately enter the corresponding value. Pay attention to maintaining the accuracy and consistency of the data. Some parameters may require input units, such as degrees, millimeters/second, etc.
3. Adjustment of key parameters
1. **Material thickness**: Materials of different thicknesses require different bending forces and molds. Thicker materials require greater bending forces, while thinner materials require more delicate adjustments to avoid material breakage.
2. **Bending angle and bending radius**: These two parameters are closely related. The bending angle determines the shape of the sheet after bending, while the bending radius affects the smoothness of the bend. The values of these two parameters need to be determined based on product design and process requirements.
3. **Mold selection**: Different molds are suitable for different bending needs. Choosing the right mold can improve production efficiency and product quality. When adjusting parameters, pay attention to choosing a mold that matches the processing requirements.
4. **Machine running speed**: Although it has no direct effect on bending accuracy, it will greatly affect production efficiency. On the premise of ensuring bending quality, the machine running speed can be appropriately increased to shorten the production cycle. However, it should be noted that too fast speed may cause material slippage or mold damage.
IV. Parameter saving and inspection
1. **Save parameters**: After adjusting the parameters, save the parameters to the system in time for subsequent use. Some CNC bending machines also support parameter backup function, which can save the current parameters as a file for future viewing and recovery.
2. **Check parameter settings**: After saving the parameters, you need to check the set parameters to ensure that they meet the actual processing requirements. You can check the correctness of the parameter settings by previewing the bending process or simulating the bending operation.
V. Safety precautions
1. **Follow the operating procedures**: When adjusting the parameters, you need to follow the operating instructions and operating procedures of the equipment to avoid damage to the equipment or safety accidents.
2. **Pay attention to equipment protection**: During the adjustment process, pay close attention to the working status of the equipment to prevent the equipment from being damaged due to overheating, overload, etc.
By following the above steps and precautions, you can ensure the accuracy and effectiveness of the parameter adjustment of the hydraulic servo CNC bending machine, thereby improving the performance and processing quality of the bending machine.