Manhart How to operate an electric plate rolling machine safely?

**Safety operation guide for electric rolling machine**
1、 Wear protective equipment**
Before operating the electric rolling machine, the operator must wear complete protective equipment correctly. This includes but is not limited to:
1. Wear work clothes that meet safety standards and avoid loose clothing and jewelry getting caught in the machine.
2. Wear a safety helmet to prevent injury from falling objects from above.
3. Wear protective glasses or goggles to prevent splashing debris or sparks from damaging the eyes.
4. Wear protective gloves to reduce the risk of direct contact between hands and the machine.
5. Depending on the needs of the workplace, it may be necessary to wear protective equipment such as earplugs, earmuffs, or respirators.
2、 * * Check the machine status**
Before operating the electric rolling machine, it is necessary to conduct a condition check to ensure that the machine is in good working condition. This includes:
1. Check whether the electrical system of the machine is normal, and whether the wires and cables are damaged or aged.
2. Check the lubrication system of the machine to ensure that there is sufficient lubricating oil at each lubrication point to reduce friction and wear.
3. Check whether all fasteners of the machine are firm and free from looseness.
4. Check the transmission system of the machine, such as gears and chains, for flexible operation and no jamming.
5. Check if the safety protection devices of the machine are intact, such as protective shields, guardrails, etc.
3、 * * Stay alert**
When operating the electric plate rolling machine, the operator must always be alert and focused on their work. This includes:
1. Do not chat with others or get distracted during the operation process.
2. Always monitor the operation status of the machine and immediately stop the machine for inspection if any abnormalities are found.
3. Do not perform cleaning or maintenance work during machine operation, unless there is a dedicated downtime or specific safety measures.
4、 * * Comply with operating procedures**
To ensure the safe operation of the electric rolling machine, operators must strictly follow the operating procedures. This includes:
1. Follow the starting and stopping procedures of the machine, and do not start or stop the machine randomly.
2. Follow the prescribed operating procedures and steps during the operation process, and do not arbitrarily change or omit any steps.
3. Do not overload the machine and avoid exceeding its maximum load-bearing capacity.
4. Regularly maintain the machine to ensure that it is always in good working condition.
5、 * * Prevent accidents**
In order to prevent accidents, operators need to take some preventive measures. This includes:
1. Set up obvious safety warning signs around the machine to remind personnel to pay attention to safety.
2. During machine operation, avoid personnel from approaching hazardous areas such as transmission components, rotating parts, etc.
3. When carrying out loading and unloading, positioning and other operations of the board, safety operating procedures should be followed to ensure the safety of personnel and equipment.
4. Regularly provide safety training and drills to operators to enhance their safety awareness and emergency response capabilities.
6、 * * Emergency response**
When an accident occurs, operators need to quickly take emergency measures. This includes:
1. Immediately stop the operation of the machine and cut off the power supply.
2. Evacuate and treat personnel according to the emergency plan.
3. Protect the scene, collect relevant evidence and information, and provide support for accident investigation.
4. Timely report to superiors and safety management departments, and follow relevant procedures for accident handling and reporting.
By following the above safety operation guidelines, the safety risks during the operation of the electric rolling machine can be minimized to the greatest extent, ensuring the safety of personnel and equipment.