Paano gamitin ang Manhart CNC machine tool at CNC circular machine

CNC circular machine is a mechanical equipment specifically used for processing circular or circular arcs. The use of CNC circular machines can improve machining efficiency, machining accuracy, and surface quality. The following is the usage method of the CNC circular machine:

1. Preparation before startup

Before using the CNC circular machine, some preparation work needs to be done. Firstly, check whether the power connection of the machine tool is normal and whether the rotation direction of the spindle is correct. Secondly, it is necessary to check whether the cutting tools and fixtures are securely installed to avoid loosening or falling off during the machining process. Finally, it is necessary to check whether the processed workpiece meets the requirements, and if necessary, pre-treatment can be carried out.

2. Operation steps

The operation steps of the CNC circular machine are as follows:

(1) Open the CNC system and enter the operation interface.

(2) According to the processing requirements, set relevant parameters such as workpiece diameter, curvature, tool parameters, etc.

(3) Adjust the position and height of the tool to ensure that the distance between the tool and the workpiece is appropriate.

(4) Start the spindle rotation and adjust the speed and feed rate.

(5) Press the start button and the machine starts processing.

(6) During the processing, it is necessary to constantly observe the operating status of the machine. If there are any abnormal situations, the machine should be stopped for inspection in a timely manner.

(7) After the machining is completed, turn off the spindle rotation and exit the operation interface.

3. Precautions

When using a CNC circular machine, the following points should be noted:

(1) To maintain the cleanliness and lubrication of the machine tool, regular maintenance and upkeep should be carried out.

(2) During the processing, it is important to constantly monitor the operating status of the machine to avoid any abnormal situations.

(3) Strictly follow the operating procedures to avoid safety accidents.

(4) For beginners, it is recommended to operate under the guidance of professionals.

In short, using a CNC circular machine requires a certain level of professional knowledge and skills, as well as compliance with relevant safety operating procedures. Only correct use and maintenance of the machine can ensure processing quality and efficiency.