Paano dapat isakatuparan ang pang-araw-araw na paglilinis at pagpapanatili ng pagpapadulas ng cutting machine equipment ng Manhart (Guangdong) CNC Machine Tool Co., Ltd.?

**Daily cleaning and lubrication maintenance of cutting machine equipment**
**1、 Daily cleaning**
1. Regular cleaning: After finishing work every day, use a cleaning cloth or soft brush to clean the dust, chips, and other impurities on the surface of the cutting machine equipment. Pay special attention to the heat dissipation and ventilation ducts of the equipment to ensure they are not blocked.
2. * * Cleaning tools * *: Use specialized cleaning tools such as dust-free cloths, vacuum cleaners, or soft brushes to avoid scratching or damaging the surface of the equipment.
3. * * Avoid liquids * *: During the cleaning process, avoid using any liquid cleaning agents as liquids may seep into the interior of the equipment, causing short circuits or other malfunctions.
4. * * Cleaning the cutting area * *: After each cutting, the cutting area must be cleaned to ensure that the workbench is clean and free of any remaining chips or impurities.
**2、 Lubrication and maintenance**
1. * * Choose the correct lubricating oil * *: Select the lubricating oil suitable for the cutting machine equipment according to the recommendations of the equipment manufacturer. Different devices may require different types of lubricants, so it is important to ensure the correct selection.
2. * * Lubrication points * *: Identify the lubrication points of the equipment, which usually include bearings, guide rails, chains, and other moving parts. Ensure that these areas are adequately lubricated.
3. Regular lubrication: According to the manufacturer’s recommendations, regularly apply lubricating grease or oil to key components of the equipment. Ensure that the amount and frequency of lubricant application meet the recommended standards.
4. * * Check lubrication system * *: If the equipment has an automatic lubrication system, regularly check its working status to ensure that the system operates normally and the oil level is sufficient.
5. * * Avoid excessive lubrication * *: Although lubrication is crucial for the normal operation of equipment, excessive lubricating oil can also cause problems. Make sure to apply only an appropriate amount of lubricating oil to avoid oil droplets splashing onto other components.
Regular daily cleaning and lubrication maintenance can ensure the stable operation of cutting machine equipment, extend its service life, and reduce the need for malfunctions and maintenance.