How to use the punching and shearing machine molds of Manhart (Guangdong) CNC Machine Tool Co., Ltd

The usage steps of the punching and shearing machine mold are as follows:
1. Confirm whether the punching and shearing machine has been installed and the power cord has been plugged in.
2. Select the appropriate mold according to the processing requirements and install it onto the punching and shearing machine. Then, according to the processing requirements, adjust the position and spacing of the mold appropriately.

3. Adjust the pressure of the punching and shearing machine according to the processed material and thickness. Generally speaking, the greater the pressure, the better the machining effect will be, but it will also cause greater wear on the machine.
4. Place the material to be processed on the punching and shearing machine and ensure that it is tightly attached to the mold. Then, press the processing button to start processing. During the processing, it is important to observe the condition of the material and adjust the processing parameters in a timely manner to achieve the best processing effect.
After processing, take out the processed material and clean the punching and shearing machine. Especially for molds and the interior of machines, timely cleaning and maintenance should be carried out to ensure the normal operation and processing quality of the machines.
The above information is for reference only. If you encounter any problems during use, it is recommended to seek professional assistance.