What details should Manhart (Guangdong) CNC Machine Tool Co., Ltd. pay attention to when cleaning the electrical box?

When cleaning the electrical box, attention should be paid to the following details:
1. Power outage: Firstly, make sure that the CNC punching and shearing machine has been completely powered off. This is the first step in the maintenance and repair of any electrical equipment, which can prevent unexpected electrical accidents from occurring.
2. Tool preparation: Prepare suitable cleaning tools, such as microfiber cloths, vacuum cleaners, cotton swabs, alcohol, or suitable electronic cleaning agents. Do not use a damp cloth to wipe electrical components to avoid short circuits.
3. Disassemble components: If necessary, some components can be removed for more thorough cleaning. But please be careful not to disassemble unfamiliar components randomly to avoid damage or loss.

4. Cleaning: Gently wipe the electrical components and circuit board with a microfiber cloth. Be careful not to use a rough cloth or wipe with force to avoid damaging the electrical components or circuit board. For stains that are difficult to remove, you can use a cotton swab dipped in alcohol to gently wipe them.
5. Inspection: During the cleaning process, check whether the electrical components are damaged or aged. If there are any problems, they should be replaced in a timely manner. At the same time, check whether the wires and connections are intact. If there is any looseness or damage, it should be dealt with in a timely manner.
6. Assembly and testing: After cleaning, assemble the components back in the reverse order of disassembly. Finally, test the CNC punching and shearing machine to ensure its normal operation and no safety risks.
7. Safety protection: During the cleaning process, attention should always be paid to the status of safety protection devices to ensure their normal operation. When maintaining and repairing equipment, ensure that safety protection devices are turned off.
By paying attention to these details, it is possible to effectively ensure the smooth cleaning and maintenance of the electrical box, and extend the service life of the CNC punching and shearing machine.