Русский 
English 
العربية 
Français 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog **Safety precautions during operation of rolling and bending machines**
As an efficient and precise metal processing equipment, the rolling and bending machine needs to strictly follow safety precautions during operation to ensure the normal operation of the equipment and the safety of operators. The following are some key safety precautions when operating the rolling and bending machine:
**1 Understanding machine performance**
Before operating the rolling and bending machine, it is necessary to fully understand the machine’s performance, working principle, operating methods, and safety characteristics. Familiarize oneself with the manual and manual of the machine, understand various functions and button functions, and avoid safety accidents caused by misoperation.
**2 Wear protective equipment**
When operating the rolling and bending machine, appropriate protective equipment must be worn, such as safety glasses, protective gloves, work clothes, etc. These devices can effectively protect the eyes, hands, and other parts of operators from splashing metal fragments, lubricating oil, and other injuries.
**3 Check the machine status**
Before starting work, it is necessary to conduct a comprehensive inspection of the rolling and bending machine to ensure that it is in good condition. Check if the power, hydraulic, pneumatic and other systems are functioning properly, and if all components of the machine are securely fastened and undamaged. If any problems are found, the machine should be shut down in a timely manner and professional personnel should be contacted for repair.
**4 Follow operating procedures**
When operating the rolling and bending machine, it is necessary to follow the prescribed operating procedures. Do not change the order of operations or skip key steps at will. At the same time, attention should be maintained to avoid distractions and operational errors.
**5 Keep the work area clean and tidy**
The work area should be kept clean and free from distractions such as debris and oil stains. Metal fragments, scraps, etc. should be cleaned up in a timely manner to prevent accidents such as stepping or slipping.
**6 Pay attention to material dimensions**
When operating the rolling and bending machine, attention should be paid to whether the size and thickness of the material meet the machining range of the machine. Do not use materials that exceed the processing capacity of the machine to avoid damaging the machine or causing safety accidents.
**7 Timely adjustment of parameters**
According to different processing tasks and material characteristics, it is necessary to adjust the parameters of the rolling and bending machine in a timely manner, such as pressure, speed, angle, etc. When adjusting parameters, follow the instructions in the operating manual to avoid blind adjustments that may cause equipment damage or safety accidents.
**8 Emergency shutdown plan**
During the operation, if encountering an emergency situation or sudden malfunction, the emergency stop button should be immediately pressed, the power should be cut off, and the machine should be shut down. Then handle according to the emergency plan to ensure the safety of operators and equipment. At the same time, professional personnel should be contacted in a timely manner for maintenance and inspection.
In short, when operating the rolling and bending machine, safety precautions must be strictly followed to ensure the normal operation of the equipment and the safety of operators. Only by achieving standardized operation and careful maintenance can the performance advantages of rolling and bending machines be fully utilized, providing strong support for the development of various industries.
