Русский 
English 
العربية 
Français 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog Daily maintenance of precision cutting machine: steps to ensure the normal operation of lubrication system
The lubrication system of precision cutting machines is an important component of their normal operation, which directly affects the stability and cutting accuracy of the equipment. Therefore, in the daily maintenance process, it is particularly important to pay attention to the maintenance and upkeep of the lubrication system. The following are the specific steps to ensure the normal operation of the lubrication system of the precision cutting machine:
1、 Clean the machine tool and guide rail
1. Regularly clean the machine tool and guide rail thoroughly to remove surface dust, oil stains, chips and other debris. Use specialized cleaning agents and a soft cloth for wiping to ensure that the surface is clean and free of residue.
2. Pay special attention to cleaning the guide rail parts, which are the key to equipment accuracy and stability. Avoid using cleaning agents or tools with particles to prevent scratching the surface of the guide rail.
2、 Turn off the gas and power supply after work
1. When leaving work or when the equipment is not in use for a long time, be sure to turn off the air and power sources to ensure that the equipment is in a completely stopped state.
2. This can avoid lubrication system damage caused by misoperation or equipment failure, and also help extend the service life of the lubrication system.
3、 Observing the condition of lubricating oil
1. Regularly check the oil level and quality of the lubricating oil tank to ensure that the oil level is within the normal range and there is no turbidity or deterioration in the oil quality.
If necessary, add or replace new lubricating oil in a timely manner to ensure the normal operation of the lubrication system.
4、 Thoroughly clean and add lubricating oil
1. Regularly clean the lubrication system thoroughly to remove oil stains and impurities, ensuring smooth and unobstructed oil circuits.
After cleaning, add an appropriate amount of lubricating oil to the lubrication system according to the requirements of the equipment manual to ensure lubrication effect.
5、 Check the operation of the rail cleaner
1. The rail cleaner is an important component for maintaining the cleanliness and lubrication of the guide rail, so it is necessary to regularly check its working condition.
2. Observe whether the rail cleaner is operating properly and whether the wiping effect is good. If there are any abnormalities, they should be adjusted or replaced in a timely manner.
6、 Clean up the garbage from the ignition gun muzzle
1. Clean the garbage and residue from the ignition gun to avoid affecting the injection and distribution of lubricating oil.
2. Use appropriate tools for cleaning, taking care not to damage the ignition gun and its surrounding components.
7、 Regularly inspect the lubrication system
1. Regularly conduct a comprehensive inspection of the lubrication system, including the integrity and working condition of lubrication pumps, pipelines, joints, and other components.
If any abnormal situations such as leakage, blockage, or wear are found, they should be dealt with and recorded in a timely manner.
8、 Record maintenance information
1. During each maintenance and upkeep of the lubrication system, detailed information should be recorded, including maintenance time, maintenance content, type and quantity of lubricating oil used, etc.
2. This helps to track the maintenance history of the equipment, identify potential issues in a timely manner, and develop corresponding preventive measures.
By following the above steps, the lubrication system of the precision cutting machine can be ensured to work properly, thereby improving the stability and cutting accuracy of the equipment and extending its service life. At the same time, it also helps to reduce the failure rate of equipment and reduce maintenance costs. Therefore, in daily use, it is necessary to strengthen the maintenance and upkeep of the lubrication system.
