Installation and debugging of bending molds

Installation and debugging of bending moldshttps://www.mhtcnc.com/product/twisted-axis-cnc-bending-machine/
1. Understand the machine performance, turn on the bending machine, adjust and check the machine status, and ensure that there are no dust, iron debris, or other debris inside the machine.
2. Check if the ratio of the thickness of the bending machine mold to the upper and lower modules is normal, and adjust the slider stroke standard.
3. Adjust the upper limit point of the module, set it to the highest point, and set the switch to leave room for the module to stay.
4. Adjust the gap between the bending machine molds, measure the gap between the upper and lower modules, and determine a reasonable gap based on the folded sheet metal.
5. Adjust the bending angle and select the angle according to the product requirements. Generally speaking, when bending a 90 ° mold, the angle setting should ensure that the middle angle is greater than the angles on both sides. If necessary, it can be processed by adjusting the screws on the machine.
6. During the bending process, calculate the accurate pressure number through a pressure gauge and adjust the pressure to avoid mold chipping.