Русский 
English 
العربية 
Français 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog 
Adjusting the parameters of the upper dynamic torsion axis CNC bending machine during processing is a key step to ensure processing accuracy and efficiency. The following are the detailed steps and precautions for adjusting the parameters, which are expressed and summarized as follows:
1. Power-on self-test and entering the parameter setting interface
1. Power-on self-test: Before starting the CNC bending machine, you must first perform a power-on self-test. The system will check each component to ensure that the equipment is in normal working condition.
2. Enter the parameter setting interface: After the power-on self-test is completed, enter the parameter setting interface of the CNC bending machine. Usually it can be operated through the touch screen or buttons.
2. Select the parameter type
In the parameter setting interface, first select the parameter type to be set. Common parameter types include:
* Bending angle: Determine the angle of the workpiece after it is bent.
* Bending speed: Control the speed at which the workpiece moves relative to the bending machine during the bending process.
* Pressure: Adjust the force applied to the workpiece during the bending process.
3. Set parameter values
1. Enter specific values: Enter the corresponding values into the selected parameters according to actual needs. For bending angle, you need to enter the target angle value; for bending speed, you can enter the appropriate speed value; for pressure, set it according to the thickness and hardness of the material.
2. Units and formats: Some parameters may require input units, such as the unit of angle is “degree”, the unit of speed may be “mm/s”, etc. When entering, ensure the accuracy and consistency of the data.
4. Save parameters
1. Click Save or OK: After setting the parameter value, you need to save the parameter to the system. Usually, you can complete the parameter saving operation by clicking the “Save” or “OK” button.
2. Backup function: Some CNC bending machines also support parameter backup function, which can save the current parameters as a file for future viewing and recovery.
5. Check parameter settings
1. Preview or simulation: After saving the parameters, check the set parameters to ensure that they meet the actual processing requirements. You can check the correctness of the parameter settings by previewing the bending process or simulating the bending operation.
2. Detailed inspection: Check whether the set parameters meet the product design and process requirements, paying special attention to key parameters such as material thickness, bending angle, bending radius, etc.
VI. Adjust parameters (if necessary)
1. Find problems: If you find problems with the parameter settings during the inspection, such as large angle errors, too fast bending speeds causing material slippage, etc., you need to return to the parameter setting interface for adjustment.
2. Adjustment strategy: When adjusting parameters, you need to follow the equipment’s instruction manual and operating procedures to avoid damage to the equipment. Depending on the specific problem, you can adjust parameters such as bending angle, bending speed or pressure appropriately.
VII. Complete parameter settings and start processing
1. Confirm that the parameters are correct: After confirming that the parameter settings are correct, exit the parameter setting interface.
2. Start processing: Place the workpiece on the bending machine and perform bending processing according to the set parameters. During the processing, pay close attention to the working status of the equipment and be ready to deal with possible abnormal situations at any time.
Through the above steps, you can ensure that the upper dynamic torsion axis CNC bending machine correctly sets and adjusts parameters during the processing process to achieve the expected processing effect. At the same time, operators need to pay attention to maintaining data accuracy and consistency when setting parameters and follow the equipment’s instruction manual and operating procedures.