Manhart How to perform regular calibration and maintenance on the bending machine?

**How to perform regular calibration and maintenance on the bending machine**
1、 Introduction
Bending machine is an important equipment for metal sheet processing, and the stability and accuracy of its performance are crucial for product quality. To ensure the normal operation and prolong the service life of the bending machine, regular calibration and maintenance are necessary. This article will provide a detailed introduction to the regular calibration and maintenance of the bending machine from the aspects of cleaning and maintenance, lubrication and maintenance, fastening inspection, electrical maintenance, tool maintenance, parameter adjustment, safety precautions, and storage and protection.
2、 Cleaning and maintenance
1. Regularly clean the outer and inner surfaces of the bending machine to remove impurities such as oil, dust, and iron filings.
2. Use a soft cloth and cleaning agent to wipe the electrical cabinet and controller, avoiding damage to electrical components from dust and moisture.
3. Clean the workbench and guide rails to ensure the smooth placement and sliding of the board.
3、 Lubrication maintenance
1. Regularly check the lubrication system to ensure sufficient and clean lubricating oil or grease.
2. Regularly replace lubricating oil or grease according to the requirements of the equipment manual.
3. Check the lubrication pipeline and joints to ensure that there are no leaks or blockages.
4、 Tightening inspection
1. Check all fasteners of the bending machine to ensure the firmness and reliability of bolts, nuts, and other fasteners.
2. Tighten loose fasteners to avoid vibration and noise during processing.
3. Check and replace damaged fasteners to ensure the stability and accuracy of the equipment.
5、 Electrical maintenance
1. Check the wiring and plugs of the electrical system to ensure that the connections are secure, free from looseness and short circuits.
2. Regularly check the working status of electrical components, such as motors, controllers, sensors, etc., to ensure that they are in normal condition.
3. Regularly dust and clean the electrical cabinet to avoid damage to electrical components caused by dust and moisture.
6、 Tool maintenance
1. Check the wear of the cutting tools, and replace those with severe wear in a timely manner.
2. Regularly clean and lubricate the cutting tools to reduce friction and wear during the machining process.
3. Regularly calibrate and adjust the cutting tools to ensure bending accuracy and machining quality.
7、 Parameter adjustment
1. Adjust the relevant parameters of the bending machine, such as bending angle, bending force, etc., according to the material, thickness, and processing requirements of the board.
2. Regularly check whether the parameter settings are correct to avoid processing errors and equipment failures caused by improper parameter settings.
8、 Safety precautions
During maintenance and calibration, strictly follow safety operating procedures and wear protective equipment.
When performing electrical maintenance, the power should be cut off first and special tools should be used for operation.
3. Regularly check the integrity and effectiveness of safety devices (such as protective covers, emergency stop buttons, etc.).
9、 Storage and Protection
When not in use, the bending machine should be placed in a dry and ventilated place, avoiding direct sunlight and rain.
2. Bending machines that are not used for a long time should be treated with rust prevention and protected with dust covers.
3. Regularly inspect and maintain stored bending machines to ensure they are in good condition before their next use.
By implementing the above measures, it is possible to ensure the smooth progress of regular calibration and maintenance of the bending machine, improve the stability and accuracy of the equipment, extend its service life, and provide strong support for the production of the enterprise.