Manhart How to determine if the operation status of a handheld laser machine is normal?

To determine whether the operation status of the handheld laser machine is normal, the following aspects can be used:
1、 Indicator light status
1. * * Running indicator light * *: When the device is in normal working condition, the running indicator light usually stays on continuously (green), indicating that the laser machine is running normally.
2. * * Fault indicator light * *: If the laser machine malfunctions, the fault indicator light will light up (usually red or yellow), indicating that the user needs to repair or replace equipment components.
3. * * Warning indicator light * *: When the device encounters some minor but important issues that require attention, the warning indicator light will light up (usually yellow). At this time, it can continue to work, but attention should be paid to checking and resolving the problem.
4. * * Offline indicator light * *: When the device is not connected to a power source or network, or is in a non working state, the offline indicator light will light up (usually gray), prompting the user to check the device connection status or confirm whether the device is in a working state.
2、 Welding effect
1. * * Weld Quality * *: Observing the quality of the weld after welding, such as whether the weld is uniform, free of pores, and slag inclusions, is an important indicator for judging the operating status of the laser machine.
2. Welding speed: Normal welding speed should be stable without significant fluctuations. If the welding speed is unstable, it may be a problem with the laser machine.
3、 Equipment sound and temperature
1. * * Sound * *: When the laser machine is working normally, the sound should be stable and there should be no abnormal noise. If there is a sharp or persistent abnormal sound, it may be due to an internal problem with the device.
2. * * Temperature * *: Pay attention to the temperature of the laser machine, especially key components such as the laser head and power supply. If the temperature is too high, it may be due to poor heat dissipation or improper power settings of the equipment, and it needs to be checked and adjusted in a timely manner.
4、 Operating parameters
1. * * Laser power * *: Check if the laser power is stable and within the set range. If the laser power fluctuates greatly or cannot reach the expected value, it may be a problem with the laser machine.
2. Welding speed: Check if the welding speed matches the set value. If there is a significant deviation, it may be a problem with the control system or motor drive.
5、 Precautions
1. * * Regular Inspection * *: Regularly conduct a comprehensive inspection of the laser machine, including power supply, gas source, optical path, control system, etc., to ensure that the equipment is in good condition.
2. * * Record Data * *: During the operation of the equipment, record relevant data such as laser power, welding speed, temperature, etc. for later analysis and judgment of the equipment status.
3. Timely maintenance: Once any problems or abnormalities are found with the equipment, it should be immediately stopped from use and professional maintenance personnel should be contacted for inspection and repair.
In summary, by observing the status of the indicator light, welding effect, equipment sound and temperature, and operating parameters, it is possible to preliminarily determine whether the operation status of the handheld laser machine is normal. At the same time, regular equipment inspection and maintenance are also important measures to ensure the normal operation of the laser machine.