How to adjust the bending angle error of Manhart (Guangdong) CNC Machine Tool Co., Ltd?

When encountering the problem of bending angle error, the following steps can be taken to adjust:
1. * * Determine the position of the lower blade * *:
*Beginners should first determine the position of the cutting edge. When adjusting the lower blade, be careful not to place it too high, otherwise during the bending process, there may be situations where the arc at the bottom of the product is too large or the two sides of the product are not parallel to the center.
2. * * Adjust the position of the upper blade * *:
*Observe the bending of the blade during the bending process. If the blade bends forward too much, the upper blade should be moved forward a bit; If the blade bends too much backwards, the upper blade should be moved back a bit.
3. * * Adjust the position of the guide plate * *:
*The guide plate plays a positioning and supporting role in the bending machine. If the position of the guide plate is incorrect, it will result in the bent finished product not meeting the requirements.
** * Setting fixed guide plate * *: Set a longer fixed guide plate on the bending machine and place it on the left side of the mold, close to the fixed guide plate of the bending machine, to protect the product from damage during the bending process.
** * Adjusting the position guide plate * *: Adjust the position guide plate on the bending mold according to the requirements of the processed product. If you want to bend at a smaller angle, you need to move the guide inward; If you want to bend at a larger angle, you need to move the guide plate outward.
Please note that the above steps are for reference only and may need to be adjusted according to specific machine models and processing requirements during actual operation. If there are still problems after adjustment, it is recommended to consult professional technical personnel or manufacturer support.