English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog Correctly adjusting the punching die is a key step in ensuring the normal operation of the punching machine and product quality. The following are the detailed steps for adjusting the punching mold:
1. * * Check the mold * *:
*Check the integrity and local damage of the mold to ensure that there are no defects.
*Clean the mold to remove surface dirt and grease.
2. * * Installation of molds * *:
*Use a mild force of a press or punch to install the mold onto the punch seat on the machine tool.
*Fix the mold onto the punch seat with a screwdriver to ensure a tight connection between the mold and the punch seat.
3. * * Adjust mold position * *:
*Adjust the position of the mold so that it is parallel to the workbench.
*Ensure that the punch is in contact with the bottom of the mold.
4. * * Check the height of the mold * *:
*Use a dial gauge to check the height of the mold and ensure that it meets the requirements.
5. * * Mold debugging * *:
*Repeatedly punching and punching miscellaneous boards to ensure good mold installation and operation.
*Choose the appropriate punch diameter and model based on the size and position of the hole to be punched.
*Adjust the punching speed and pressure of the punch or press to ensure a good stamping effect.
6. Lubrication and Protection:
*Select the appropriate lubricant based on the combination of the mold and processing materials, and evenly apply it to the surface of the mold and the cutting area.
*Wear personal protective equipment, including gloves, goggles, and work clothes.
7. * * Continuous monitoring * *:
*Throughout the entire punching process, it is necessary to continuously monitor the status of the mold and the quality of the punching to ensure consistency and accuracy of the punching.
In addition, to prevent mold feeding, the following measures can be taken:
*Use specialized anti belt material concave molds.
*Regularly sharpen the mold, maintain its sharpness, and perform demagnetization treatment.
*Increase the gap between the concave molds.
*Using oblique blade molds instead of flat blade molds.
*Install a feeder on the mold.
*Reasonably increase the modulus of entry of the mold.
*Regularly check the fatigue strength of the mold spring or discharge sleeve.
By following these steps and precautions, it is possible to ensure the correct adjustment and maintenance of the punching mold, thereby improving production efficiency and product quality.
