English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog Cleaning the oil electric servo CNC bending machine is an important step to ensure its normal operation and extend its service life. The following are the basic steps for cleaning the oil electric servo CNC bending machine:
1. * * Turn off power * *: Before cleaning, make sure to turn off the main power of the CNC bending machine and unplug the power plug of the machine head to ensure safe operation.
2. * * External cleaning * *: Use a soft cloth or specialized cleaning agent to wipe the surface of the machine to remove dust and oil stains. Be careful not to use excessively damp cloths or corrosive cleaning agents to avoid damaging the surface of the machine.
3. Internal cleaning:
** * Cleaning lubrication system * *: Prepare a certain concentration of cleaning agent and pour it into the lubrication system. After cyclic cleaning, discharge it. This helps to remove oil and impurities from the system, ensuring the normal operation of the lubrication system.
** * Cleaning the conveyor belt * *: Use a brush to clean the dust and debris on the conveyor belt. Then, rinse the conveyor belt clean with clean water. During the cleaning process, be careful to avoid water from entering other parts of the machine.
*Cleaning hydraulic components: For hydraulic components that need to be cleaned, solvent immersion cleaning can be used. Immerse the hydraulic components into a cleaning tank with heating equipment, add an appropriate amount of cleaning solvent, and introduce compressed air or steam. After soaking for a period of time, remove the hydraulic components and air dry or wipe them dry.
4. * * Inspection and Replacement * *: During the cleaning process, pay attention to checking the wear of each component. If severely worn parts are found, they should be replaced in a timely manner to ensure the normal operation and bending quality of the equipment.
5. * * Drying and Restarting * *: After ensuring that all components are dry, reassemble the equipment. Then, restart the CNC bending machine and check its operation to ensure everything is normal.
Please note that during the cleaning process, the cleaning guidelines and safety operating procedures provided by the equipment manufacturer should be followed to ensure correct and safe operation. In addition, regular professional inspection and maintenance of equipment is also very important to ensure its stability and extend its service life.
