How can Manhart (Guangdong) CNC Machine Tool Co., Ltd. effectively maintain the cooling system of the CNC torsion shaft bending machine?

To effectively maintain the cooling system of the CNC torsion shaft bending machine, the following steps and suggestions can be followed:
1. * * Regular check of coolant * *: Ensure that the coolant is maintained at an appropriate level and check for contamination or aging. If any odor, color change or sediment is found in the coolant, it should be replaced in a timely manner.
2. * * Cleaning the radiator * *: Regularly clean the surface of the radiator to remove accumulated dust and dirt, ensuring good heat dissipation. You can use a soft brush or vacuum cleaner to clean the radiator.
3. * * Check coolant circulation * *: Ensure that the coolant circulation is smooth and there are no blockages or leaks. Regularly inspect the coolant pump and pipelines to ensure their normal operation.
4. * * Monitoring coolant temperature * *: Install a temperature monitoring device to monitor the temperature of the coolant in real time. If the temperature is found to be too high, timely measures should be taken, such as increasing the coolant flow rate or reducing the processing speed.
5. * * Replace coolant filter element * *: According to the manufacturer’s recommendation, regularly replace the coolant filter element to remove impurities and metal particles in the coolant, protecting the machine from wear and corrosion.
6. * * Training operators * *: Ensure that operators understand the importance of the cooling system and the correct maintenance methods. Incorrect operation may cause cooling system failure or damage.
7. * * Follow manufacturer’s recommendations * *: Refer to the maintenance manual and guidelines provided by the manufacturer, and carry out maintenance and upkeep of the cooling system according to their recommendations. Manufacturers usually provide detailed maintenance plans and schedules.
8. * * Regular inspection of electrical connections * *: Although this is not related to the coolant itself, it is also important to check the electrical connections related to the cooling system. Ensure that the wires and cables are not worn or corroded, and ensure that the sensors and switches are working properly.
Following these steps and suggestions can effectively maintain the cooling system of the CNC torsion shaft bending machine, ensuring its stable operation and extending its service life. At the same time, regular professional maintenance and upkeep are also very important, which can timely detect and solve potential problems.