Manhart Comment optimiser les performances d'une bobineuse CNC servo entièrement électrique en utilisation quotidienne ?

To optimize the performance of the fully electric servo CNC coiling machine in daily use, the following suggestions can be referred to. These suggestions combine the key information in the previous article and are divided and summarized according to a clear structure:
1、 Correct operation and maintenance
1. * * Strictly follow the operation manual * *: Follow the steps and guidelines in the equipment operation manual to ensure correct and error free operation.
2. * * Regular Cleaning * *: Regularly clean the inside and outside of the equipment, especially the electrical cabinets, motors, and transmission components, to remove dust and debris and maintain the cleanliness of the equipment.
3. * * Regular lubrication * *: According to the requirements of the equipment manual, regularly lubricate the transmission components, bearings, etc. of the equipment to reduce wear and friction.
4. * * Check electrical connections * *: Regularly check whether the electrical connections are secure and whether the cables are damaged to ensure the stable operation of the electrical system.
2、 Optimize control parameters
1. * * Adjust servo control parameters * *: Adjust the control parameters of the servo system, such as gain, bias, speed loop, and position loop, according to specific processing requirements and equipment characteristics, to optimize system performance.
2. * * Apply advanced control algorithms * *: Consider using advanced control algorithms such as fuzzy control, neural network control, etc. to improve the response speed and anti-interference ability of the servo system.
3、 Mechanical structure adjustment and calibration
1. * * Ensure smooth transmission system * *: Ensure the smooth operation of components such as belts, gears, or direct couplings in the transmission system to reduce errors and losses in power transmission.
2. Regular calibration of feedback system: Servo systems rely on accurate feedback signals to achieve precise control, so feedback devices such as encoders or sensors should be calibrated regularly to ensure their accuracy and stability.
4、 Optimize the working environment
1. * * Control temperature and humidity * *: Keep the temperature and humidity of the equipment working environment within an appropriate range, avoiding the impact of high or low temperature and humid environment on equipment performance.
2. Dustproof and Waterproof: Take measures to prevent dust and moisture from entering the interior of the equipment, such as installing dust covers, waterproof covers, etc.
5、 Regular maintenance and inspection
1. * * Regularly replace vulnerable parts * *: According to the recommendations in the equipment manual, regularly replace vulnerable parts such as drive belts, lubricating grease, etc.
2. * * Regular inspection of equipment performance * *: Regularly test and evaluate the performance of equipment, such as machining accuracy, operational stability, etc., in order to promptly identify and address issues.
6、 Use high-quality components and accessories
1. * * Choose high-quality components * *: When maintaining or upgrading equipment, choose high-quality components and accessories to ensure the stability and reliability of the equipment.
2. * * Avoid using inferior substitutes * *: Avoid using unverified inferior substitutes, which may not meet the performance requirements of the equipment and increase the risk of failure.
By implementing the above measures, the performance of the fully electric servo CNC coiling machine can be effectively optimized in daily use, improving the stability and processing accuracy of the equipment, and extending its service life.