Manhart Comment gérer les défauts courants de la bobineuse CNC servo entièrement électrique ?

#How to deal with common faults of fully electric servo CNC coiling machine
The fully electric servo CNC coiling machine is an indispensable and important equipment in modern industrial production, and its efficient and precise processing capability provides strong support for various coiling processes. However, during use, the equipment is inevitably prone to various malfunctions. This article will propose corresponding response methods and solutions for the six common faults of fully electric servo CNC coiling machines.
## 1. Power failure
###Fault phenomenon
-The device cannot start
-No display or abnormal display on the screen
###Solution
-Check if the power plug is securely plugged in and if the power outlet has power
-Check if the internal power cord of the device is damaged or aged, and replace it with a new one if necessary
-Check if the power switch is damaged. If it is damaged, replace it with a new switch
-If possible, a multimeter can be used to check if the power supply voltage is normal
## 2. Motor connection issue
###Fault phenomenon
-The motor does not rotate or rotates abnormally
-The motor is overheating severely
###Solution
-Check whether the connection between the motor and the equipment is firm, and whether there is any looseness or detachment
-Check whether the transmission belt, chain, etc. between the motor and the equipment are damaged, and replace them in a timely manner if they are damaged
-Check if the motor fan is running properly and ensure good heat dissipation of the motor
-If the motor is damaged internally, it is necessary to contact professional maintenance personnel for repair or replacement
## 3. Servo motor problem
###Fault phenomenon
-The servo motor cannot work properly
-The position deviation of the servo motor is too large
###Solution
-Check if the connection between the servo motor and the controller is normal, and if there is any looseness or poor contact
-Check if the servo motor driver setting parameters are correct. If there are any errors, reset them
-Check if the servo motor encoder is damaged or contaminated, and clean or replace it if necessary
-If the servo motor is damaged internally, it is necessary to contact professional maintenance personnel for repair or replacement
## 4. Unstable speed
###Fault phenomenon
-The device’s running speed fluctuates between fast and slow
-The device is running unstably, causing shaking
###Solution
-Check if the servo motor driver settings parameters are correct, especially the speed control parameters
-Check whether the equipment transmission system is smooth and whether there is any jamming phenomenon
-Check if the equipment load is too high, and if necessary, reduce the load
-Check if there is interference in the equipment control system and take anti-interference measures if necessary
## 5. Excessive noise
###Fault phenomenon
-Abnormal noise generated during device operation
-Noise affects the working environment and the health of operators
###Solution
-Check if all components of the equipment are securely installed and if there is any looseness
-Check whether the equipment transmission system is damaged or worn, and repair or replace it if necessary
-Check if the equipment lubrication system is working properly and add or replace lubricants in a timely manner
-If there are defects in the device design, it is necessary to contact the device manufacturer for improvement
## 6. Excessive vibration
###Fault phenomenon
-Abnormal vibration occurs during equipment operation
-Vibration affects equipment accuracy and lifespan
###Solution
-Check whether the equipment foundation is firm and whether there is any sinking or loosening phenomenon
-Check if all components of the equipment are installed correctly and if there is any misalignment or deviation
-Check whether the equipment transmission system is damaged or worn, and repair or replace it if necessary
-Check if the equipment load is evenly distributed, and adjust the load distribution if necessary
##Summary
Although there are various common faults in fully electric servo CNC coiling machines, most of them can be solved through careful observation and individual troubleshooting. In daily use, it is necessary to strengthen the maintenance of equipment, regularly check the operating status of each component of the equipment, timely discover and deal with potential problems, and ensure that the equipment is always in good working condition.