Français 
English 
العربية 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog Operation manual for CNC system of electro-hydraulic servo bending machine
1、 Preface
This operation manual aims to provide detailed operation guidelines for users who use the CNC system of the electro-hydraulic servo bending machine. Please read this manual carefully before use and follow the steps in the manual to ensure the normal operation of the equipment and the safety of personnel.
2、 Equipment Overview
The CNC system of the electro-hydraulic servo bending machine adopts advanced electro-hydraulic servo technology to achieve high-precision sheet metal bending processing. This system has the characteristics of simple operation, stable performance, and high bending accuracy, and is widely used in industries such as metal processing and sheet metal manufacturing.
3、 Introduction to the operation interface
1. CNC system display screen: displays current machining parameters, bending angle, bending speed, and other information.
2. Control panel: including power switch, emergency stop button, start/stop button, and other control buttons.
3. Parameter setting interface: used to set bending parameters, sheet thickness, material, etc.
4、 Operation steps
1. Preparation for startup: Check whether the equipment is in good condition, whether the power supply is normal, and ensure the safety of the operating environment.
2. Start up: Press the power switch, the CNC system display screen will light up and enter standby mode.
3. Parameter setting: Set the corresponding bending parameters in the parameter setting interface based on the thickness, material, and bending requirements of the board.
4. Workpiece clamping: Place the sheet metal to be bent on the bending machine as required and clamp it with a fixture.
5. Bending operation: Press the start button, and the bending machine will start bending according to the set parameters. During the bending process, the bending angle and speed can be observed in real-time through the CNC system display screen.
6. Completion and Unloading: After the bending is completed, the CNC system display screen will display completion information. At this point, the stop button can be pressed to unload the workpiece from the bending machine.
5、 Precautions
Before operation, please ensure that you are familiar with the content of this operation manual and follow the steps to operate.
2. During the bending process, please keep the operating area clean and avoid debris interfering with the normal operation of the equipment.
3. It is strictly prohibited to touch the moving parts of the bending machine during equipment operation to avoid accidental injury.
If any abnormalities are found in the equipment, please immediately press the emergency stop button and contact professional personnel for repair.
6、 Maintenance and upkeep
1. Regularly inspect the hydraulic system, electrical system, and transmission components of the equipment to ensure they are in good working condition.
2. Regularly lubricate the lubrication parts of the equipment to maintain flexible movement.
3. Regularly calibrate and debug the CNC system to ensure its control accuracy and stability.
