Manhart (Guangdong) CNC Machine Tool Co., Ltd. CNC Punching and Shearing Machine Safety Operating Procedures

Safety operating procedures for CNC punching and shearing machines
1、 Equipment inspection and preparation
Before operating the CNC punching and shearing machine, it is necessary to conduct a comprehensive inspection of the equipment. The inspection content includes but is not limited to: whether the mechanical components of the equipment are intact, whether the electrical system is normal, whether the lubrication system is sufficient, etc.
2. Confirm the safety of the environment around the equipment, ensure that the work area is clean and free of debris, and avoid accidents such as tripping or impact during operation.
2、 Wear safety protective equipment
1. Operators must wear complete safety protective equipment, including but not limited to: safety helmets, protective goggles, gloves, work clothes, etc.
2. Ensure that the protective equipment worn complies with safety standards and is correctly worn to effectively prevent accidental injuries.
3、 Comply with operating procedures
1. Strictly follow the operating procedures of the CNC punching and shearing machine, and do not arbitrarily change or omit steps.
During the operation, pay attention to the operating status of the equipment, and if there are any abnormalities, stop the machine immediately for inspection.
4、 Prohibit illegal operations
1. It is prohibited to carry out maintenance, repair, or cleaning work while the equipment is in operation.
2. It is prohibited to put hands or other objects into the hazardous area of the equipment to avoid accidents such as pinching or collision.
3. It is prohibited for untrained or unqualified personnel to operate CNC punching and shearing machines.
5、 Emergency situation handling
In case of emergency, such as equipment malfunction or personal injury, the emergency stop button should be immediately pressed to cut off the power supply and ensure the safety of equipment and personnel.
In emergency situations, it is important to remain calm, quickly take the correct response measures, and promptly report to relevant personnel.
6、 Regular maintenance and upkeep
1. Regularly maintain and upkeep the CNC punching and shearing machine, including lubrication, fastening, cleaning, etc., to ensure the normal operation of the equipment.
2. Maintenance work should be carried out by professional personnel, strictly following the equipment manual and maintenance manual for operation.
7、 Training and qualified employment
1. Operators should receive professional training on the operation of CNC punching and shearing machines, and master the basic operation and safety knowledge of the equipment.
Only personnel who have received training and passed the assessment can operate the CNC punching and shearing machine on duty.
8、 Neat work area
1. Keep the work area tidy and promptly clean up waste and debris around the equipment.
2. Regularly clean and disinfect the work area to ensure the hygiene and safety of the operating environment.
By following the above safety operating procedures for CNC punching and shearing machines, the normal operation of the equipment and the safety and health of operators can be ensured. Each operator should remember and abide by these regulations to jointly create a safe and efficient working environment.