Machine-outil CNC Manhart : comment utiliser les cintreuses CNC

CNC bending machine is a common metal plate processing equipment, mainly used for bending and forming various types of plates. The following is the usage method of CNC bending machine:

1. Preparation work: Before operating the CNC bending machine, some preparation work needs to be done first. Firstly, it is necessary to check whether the power and air sources are normal to ensure that the machine can operate normally. Secondly, check if the oil tank and hydraulic system are filled with oil, and lubricate the machine to reduce wear and friction. Finally, it is necessary to check whether the size and thickness of the board meet the requirements, in order to avoid machine damage or decreased processing accuracy caused by board issues.
2. Operation steps: When using the CNC bending machine, it is necessary to follow the following steps for operation. Firstly, place the sheet metal on the feeding device and adjust the position of the stopper to ensure that the sheet metal can accurately enter the bending section. Then, open the CNC system, select the appropriate bending program, and input relevant parameters such as bending angle, length, etc. Next, adjust the position of the slider to align it with the lower mold and ensure that the slider can slide smoothly. Finally, press the start button and the machine starts processing. During the processing, it is necessary to constantly observe the operating status of the machine. If there are any abnormal situations, the machine should be stopped for inspection in a timely manner.
3. Precautions: When using a CNC bending machine, the following points should be noted. Firstly, it is important to choose the appropriate mold and bending program to avoid damage to the sheet metal or a decrease in accuracy due to improper parameter settings. Secondly, during the processing, it is necessary to maintain the cleanliness and lubrication of the machine, and regularly inspect and replace vulnerable parts. Finally, for beginners, it is recommended to operate under the guidance of professional personnel and strictly follow the operating procedures.
4. Maintenance: In order to maintain the good performance and service life of the CNC bending machine, regular maintenance is required. This includes inspecting and replacing worn parts, cleaning machines, inspecting electrical components, etc. Meanwhile, during use, it is also important to observe the operating status of the machine and promptly handle any abnormal situations.

In short, the correct use and maintenance of CNC bending machines are the key to ensuring machining quality and efficiency. Strictly follow the operating procedures and pay attention to safety and hygiene issues during use.