How to replace the worn CNC punching and shearing machine mold of Manhart (Guangdong) CNC Machine Tool Co., Ltd?

The replacement steps for CNC punching and shearing machine molds after wear are as follows:
1. * * Power outage and preparation * *: First, ensure that the equipment is powered off and locked to prevent accidental startup during the replacement process. Clean up debris and residues on the equipment to ensure that the operating area is clear and visible, reducing the risk of accidents. At the same time, ensure that the lifting equipment used, such as cranes, cranes, etc., is in good condition and has undergone maintenance.
2. Lubrication and exhaust: Use an appropriate amount of lubricant to lubricate moving parts to ensure smooth movement during mold replacement. Turn on the nearby exhaust equipment to ensure air circulation during mold replacement.
3. * * Dismantling of old molds * *: Professional personnel use appropriate lifting equipment to safely lift and move the old molds, avoiding collisions with other equipment or personnel. During the disassembly process, ensure that there are no moving parts or tools around to avoid accidents. Gradually disassemble the old mold, paying attention to maintaining its stability and avoiding slipping or tilting.
4. * * Install new mold * *: Use the special tool provided with the machine to place the new mold into the corresponding positioning hole, and tighten the positioning screws. Ensure that the positioning keyways of the mold are correctly aligned to avoid misalignment of the upper and lower mold keyways, which may cause damage to the mold.
5. * * Inspection and Testing * *: After replacement, check if the new mold is securely installed and if all components are correctly installed. Then, conduct no-load and load tests to observe the operation of the equipment, ensure the adaptation and alignment of the new mold with the equipment, and ensure the normal operation of the mold after replacement.
6. * * Maintenance and upkeep * *: After replacing the mold, do not forget to perform necessary maintenance and upkeep on the equipment to extend its service life and improve production efficiency.
Please note that the above steps are for general guidance only, and the specific replacement steps may vary depending on the equipment model, mold type, and operating environment. When replacing the mold, it is recommended to refer to the equipment’s user manual or consult professional technical personnel to ensure the safety and correctness of the operation.