How is the lubrication and maintenance of the fully electric servo CNC rolling machine of Manhart (Guangdong) CNC Machine Tool Co., Ltd. carried out?

**Lubrication and maintenance steps for fully electric servo CNC rolling machine**
1. Introduction
As an important metal sheet processing equipment, the fully electric servo CNC rolling machine requires appropriate lubrication and maintenance during daily use to ensure its long-term stable operation, improve production efficiency, and extend the service life of the equipment. Proper lubrication and maintenance can not only reduce equipment wear, but also improve the working accuracy and reliability of the equipment. The following will provide a detailed introduction to the lubrication and maintenance steps of the fully electric servo CNC rolling machine.
2、 Lubrication and maintenance steps
1. * * Clean the surface of the equipment**
Before carrying out lubrication and maintenance, it is necessary to first use a cleaning cloth or brush to remove dust, impurities, and oil stains from the surface of the equipment, ensuring the cleanliness of the lubricating oil and preventing impurities from entering the interior of the equipment.
2. * * Check the lubricating oil level**
Open the lubrication oil tank or oil level observation window of the equipment and check whether the oil level of the lubricating oil is within the normal range. If the oil level is too low, lubricating oil should be replenished to the appropriate position in a timely manner.
3. * * Replace expired lubricating oil**
According to the recommendation of the equipment manufacturer, replace the lubricating oil regularly. Before replacement, the old oil should be thoroughly drained and the interior of the fuel tank should be wiped with a clean cloth to ensure that there are no impurities left. Then add new lubricating oil, ensuring that the oil model and specifications meet the equipment requirements.
4. * * Lubricating the sliding guide surface**
Apply an appropriate amount of lubricating oil to the sliding guide surface of the equipment to ensure good lubrication and reduce friction and wear.
5. * * Lubrication of transmission gears**
Apply an appropriate amount of lubricating oil to the transmission gears of the equipment to ensure smooth rotation and reduce transmission resistance.
6. * * Apply lubricating grease to the bearings**
Apply an appropriate amount of lubricating grease to the bearing area of the equipment to ensure the lubrication and sealing performance of the bearing, and reduce bearing wear.
7. * * Check the integrity of the seals**
Check the sealing components of the equipment, such as oil seals, dust covers, etc., to ensure they are intact and prevent lubricating oil leakage. If there are damaged or aged seals, they should be replaced in a timely manner.
8. * * Record maintenance status**
After completing lubrication and maintenance, detailed information such as the maintenance time, the type and quantity of lubricating oil used, and the replaced parts should be recorded for future reference and maintenance.
3、 Conclusion
The lubrication and maintenance of the fully electric servo CNC rolling machine is an important measure to ensure the long-term stable operation of the equipment and extend its service life. By regularly performing the above lubrication and maintenance steps, equipment wear can be effectively reduced, and the working accuracy and reliability of the equipment can be improved. I hope this document can provide useful guidance for your equipment lubrication and maintenance work